I know these computers rarely fail but got a second hand one swapped it over connected up the link cleared all the stored faults in the replacement turn ignition off back on working spot on now. Thanks for your help. Cheers. paul.

Just swapped the sensors wiring over by making up extension leads. But the fault still shows up as the front right so the fault must be in the wiring (although the left and right input resistances read the same) or the ABS ecu. Is it possible to do a hard reset or similar on the ABS ecu...

Hi I am getting there, to make sure of my technique I disconnected the lsf sensor then got a 4-14 error which did clear when reconnected. The sensors must be tested for resistance on startup. the OSFr tests ok on a multimeter about 1k resistance. I will try swapping the left and right sensors...

I was doing greenlaning everyday last winter 1km of deep rutted farm field with a old disco 1 full of kids from the house we are trying to build to the bus stop. The only thing that kept us from grounding was higher profile tyres. Only thing is the car will only go in a straight line until the...

Hi Stuart Thanks for that info. Not sure if I am clearing the memory I seem to have tried every combination, The last time I tried I waited until the 2-3 flash finished then removed the link waited until abs light stayed on then re-inserted the link then after the 4 -12 flashes removed link...

problem with my V8 auto (lpg) 1998 disco 1, with light staying on. The job below should take about an hour if you know what you are doing it took me about 12 hours. did the link diag got 2-12 flashes- front right sensor checked sensor with multimeter, open circuit. Changed sensor drove upto 5mph...

Had a similar problem with 1998 disco 1, with light staying on. The job below should take about an hour if you know what you are doing it took me about 12 hours. did the link diag got 2-12 flashes- front right sensor checked sensor with multimeter, open circuit. Changed sensor drove upto 5mph...