I've seen two different lengths of these as well, so if yours does not touch you probably have the shorter version when you need the longer one.

Are these photos available anywhere? (all broken links for me here) I'm working on a 200TDI/Disco into a Series IIA/III hybrid coiler and need to deal with the fact the turbo and steering rod want to be in the same location; and still hopefully use the Steve Parker conversion exhaust system I'd...

Last time I was on expedition and ran into fuel problems I did the same, used the Mr. Gasket electric diesel fuel pump for about $40 and even once everything thawed (had the problems in -12F in Wyoming) I found that turning on the electric pump between the tank and lift-pump gave quite a bit...

So people are clear, this is not an issue fitting an Exmoor part to a Land Rover part, the issue is in bolting together two parts, both manufactured by Exmoor Trim and intended to bolt together but where they decided to use the same bracked on the side frames as the centre frame, except the...

Well, I can confirm that 10 months later they still don't include instructions and the reclining hinges do not fit the centre seat. This is a manufacturing defect and honestly they're on the line for any costs to get a "professional" fix done that does not compromise the strength or safety of...

From what I hear the trick to galvanizing the thin metal like on a bulkhead is to instruct the person doing the work not to 'quench' it after and to let it air-cool. It seems that it is the thermal shock of being tossed into cold water that causes the warping. I've talked to a couple people...