The original anr1853 part fits both sides and the arm rotates through 360 deg. When you swop sides it twists laterally so top / bottom remain the same the wiring is the same but rotation is clockwise on right and anti clockwise on left. The stc3733 and stc3734 arms however only move 180 deg...

Thanks for info, my parts info is from 2004 and shows what appears to be the only available new parts you can obtain now. I've tried one of these but after fitting, it looked faulty when tested from the ECU connector. I've checked the wiring to the unit and that is ok, the unit itself looks to...

Thanks I have the part numbers from a copy of landrovers parts manual but it only goes to year 1994. I have fitted a britpart sensor but it does not test correctly with a meter, in fact it tests as if the wires going to each end of the coil are reversed, which is why asked if anyone had had the...

Can anyone tell me if the original front height sensors are the same left to right. Also when fitting replacement britpart sensor if there is any change in the wiring, my car has a chassis No of ma6599xx Baary

No not as yet, l've refurbished the compressor, air dryer and most recently the valve block. The bags inflate manually and maintain there height for days. I've used the RSW software to examine the ECU which returns 0 in all the fault stores but gives no fault details. Using the programme I can...

No not as yet, l've refurbished the compressor, air dryer and most recently the valve block. The bags inflate manually and maintain there height for days. I've used the RSW software to examine the ECU which returns 0 in all the fault stores but gives no fault details. Using the programme I can...

I have now checked inside the ecu which is amr3234 and found no wires, the components all seem to be connected to the circuit board. Tried the earth by connecting jump lead between earth post and battery. The car was inflated awhile back and has remains up. I have tested for leaks with soapy...

Thankyou for your reply. The inhibit is ok and I have checked the earth goes on and off at pin 34 I have not opened the ecu so could check that. I 've measured the resistance of all height sensors and they are all approximately the same. I have used your method and inflated the airbags and it...

Thankyou, have done. Still learning.

I have a 95 soft dash classic which I’ve owned and maintained for 21 years. Apart from changing the airbags some time ago I have had no problem with its EAS. However, I returned to my car a while back to find it had lowered to its bump stops. When I started the car, I saw no initial lights on...

I have a 95 soft dash classic which I’ve owned and maintained for 21 years. Apart from changing the airbags some time ago I have had no problem with its EAS. However, I returned to my car a while back to find it had lowered to its bump stops. When I started the car, I saw no initial lights on...

Thankyou

I have a 95 soft dash classic which I’ve owned and maintained for 21 years. Apart from changing the airbags some time ago I have had no problem with its EAS. However, I returned to my car a while back to find it had lowered to its bump stops. When I started the car, I saw no initial lights on...