Thanks I have the part numbers from a copy of landrovers parts manual but it only goes to year 1994. I have fitted a britpart sensor but it does not test correctly with a meter, in fact it tests as if the wires going to each end of the coil are reversed, which is why asked if anyone had had the same problem with my age of car. As for swopping sides I read a post somewhere on the forum thanking someone for the tip but could not find a follow up. Britpart I have not had to use before but they seem to be the only source now.
Barry
Is that the plug from the height sensor?6 wires run from the control box.
2 of those are then looped across 2 pins each, so 8 pins (hollow) are wired.
Yes just to confirm, although my Parts Catalogue title says 1992 to 1994 it goes on to say 'plus model year 1995'.
I am wondering whether it is possible to have the sensors the wrong way around?
As the two sensors are identical they will both need to be mounted so that lifting the car, dropping the wheels, turns both rheostats the same way (clockwise I think).