SOLVED!!!!! After checking headlight level ecu, and found none present, I then went onto check ds2 line and to fit a seperate wire from obd socket direct to ds2 pin on abs module. When stripping wire, it broke at abs connector. Scraped out all the green corrosion and found a wire. Dropped in...

As can be seen, abs module communicates via canbus to sensors etc and to instrument cluster. Now I have abs warnings on dash, would this suggest abs module IS communicating on the canbus? I see the diagnostic socket is connected to abs module via ds2 bus. I think I have a canbus error on the...

These are the diagrams

Yeah I'm thinking the android unit may have done something. I hear issues regarding the lcm. I have disconnected both headlights to see if I can communicate with abs. But still cannot. I have diagrams of all the buses. The canbus error is logged in suspension and bcm. Would a canbus on say...

2003 l322 td6 Replaced abs module 4 times now and still not found by any of my diagnostics. I have a foxwell, bmw scanner 1.4 and inpa. All other modules communicate. I have checked cable harness for live and earth's and seem to good. Soooo I am at a loss. I also have a a can bus...

Hello, I have a 2002 l322 td6 I have been working away sorting various bits and bobs. Next big jib are the rear arches. My main headache though would be this abs traction susp fault. I have now replaced the abs module twice for used parts. And still no communication. I have checked live...

P38 diesel syncmate for sale. £80 plus postage. Mail me on here Or steven_mckinlay@aol.com If ad still here then still for sale. No offers, as 80 is very cheap for item, that's what I paid. Works perfectly.

My mistake the discsand pads were £156 all in. Mpg wise, if I get a little better then no problems. I'm more interested in the truck moving and it does that a hell of a lot better now with the chip.

Suppose on the up side/legal side I am now getting 27mpg running around town! Need to take her on the highway and see what she getting.

Well the discs aren't a waste of time, I paid 219 for 4, including pads. Cheaper than most standard disc sets. Radius arm bushes, well they were shot and I paid very little for poly bushes an d lifetime guarantee. Wheel spacers, purely cosmetic. Straight thru exhaust, personal taste I...

Well that's it done, 20mins, swapped the ecus over, used the sunyc mate on each car. Both started up. And oh what a difference in responsiveness, acceleration etc with he chipped ecu in this dhse. I'll admit i was watching for smoke and sparks. But it looks OK. Now tomorrow, gonna swap...

Also I done the coin thing with the egr on the 98. As the pipe from exhaust manifold had a crack in it. And for the life of me I could not get another pipe. So I just blanked of both ends.

The 98 dse has egr, I noticed tho that the 2000 has a fan on gearbox intercooler. Also when I purchased the chip of ebay, it stated you must checked chip number on ecu and then tell seller who would then send correct chip. Would I do any damage by swapping over? I have the syncmate also so I...

All numbers match except those on white sticker, and main code, one is err code and other is msb code.

Hello, I am currently swapping all new stuff from my old 98 dse to new dhse 2000. I chipped my old car ecu and would like to know if I can swap the ecu over instead of buying a new chip.

Yes very much appreciated Martin. That's her all washed and brought up to temp. Few rattles but smoother than my old 98 dse. Had a wee drive and it's all good. Next to get everything swapped over from old to new then mot time. Happy days

Is resyncing becm to ecu separate to turning security off. Turn immob off Turn alarm off THEN resync becm to ecu? If so then all we done is turn security off correct? We should then resync becm to ecu?

Right OK,using nanocom, immobiliser off, alarm off. Checked fuel going into pump, OK. Nanocom stating no communication with outstations. No fuel at injectors. No warnings on dash. Turning over fine no starting

A

A