In the fuel filter I put a clear one in place of the old one and I can see fizzy air coming through, I was having the problem before I replaced the filter I was hoping it was the problem

Its a new sender unit so the pipes are good

Im having trouble with getting air in my fuel lines with my 300tdi I replaced the fuel pump, lift pump, all of the fuel lines, put in different fuel filter in (clear in line) and I bypassed the sedimenter but im still getting air in the lines, its small fizzy bubbles.

Unfortunately I have a automatic will it work the same way if its in gear?

Im having trouble tightening down my pulley bolt, when I get it about half way in before the crank starts turning, is there a trick to stop it from turning?

Whenever I try to slide the pulley on it falls right off, is there a trick to it or a tool to use?

Im not trying to glue the pulley on, I was trying to glue the woodruff key in place so when I put the pulley on the key doesnt fall out of the slot.

Im trying to reinstall my crankshaft pulley and when I put it on the woodruff key it keeps falling off, I've tried glueing it in and using epoxy but nothing is working, what is the best way to install it?

I'm putting a lift on my discovery 1 ( 2 inch shocks and springs and 2 inch spacers) and I installed the back with no problems, but in the front I can't reconnect the sway bar and the springs seem to be at an angle and not fully seated and I'm not sure if with the shocks if they connect to the...

I cracked open the injectors and fuel was squirting out but I still cant get it to start

So where do I loosen the injectors from? And im in Suffolk County

I've tried using starter fluid. And its an automatic

I just gave that I try and it still wouldn't start

I just bought my first land rover and I was trying to get it to start easier so I bought new glow plugs and I also was trying get the air out of the fuel system so I read online to crack the bleed screw on the fuel filter head but I accidentally took off the banjo bolt and now I cant get it to...