1. Tonks4x4

    Flapper Injection Help

    Range Rover classic flapper type injection system. I have lost the will to live with this install. How hard can it be there is only 4 wires???? I have checked everything I can think of apart from setting fire to it... Live feed 12v to efi loom (Brown Wire) Ignition live 12v to efi loom (White...
  2. Tonks4x4

    track rod ends

    These fit also.. RTC5869 - RH Thread version RTC5870 - LH Thread version
  3. Tonks4x4

    Straight Six 2.6

    What do you want to know I have a parts manual for it?
  4. Tonks4x4

    Disco window motors

    Yes just checked that info and yes the part numbers I have given you are the ones you want... I have some second hand ones if you are interested. Brian
  5. Tonks4x4

    What's the knock?

    My guess would be the 2 rubber bushes on the front Anti roll bar Part No. RBX101181 (With ACE) / RBX101690 (Without ACE). Very common to cause those symptoms.
  6. Tonks4x4

    Disco window motors

    From memory I think the part numbers you have quoted are for Land Rover Discovery's upto 1994 which I think have a greater number of teeth Part No: CUR100440 & CUR100450 are for the later 300 series Disco's and have fewer teeth but i will grab some out the box tomorrow and check for you...
  7. Tonks4x4

    Door mirrors

    Yes I sorted it the same day thanks Dave
  8. Tonks4x4

    Got my new TD5 - couple of questions...

    Yes it's Oslo Blue :-)
  9. Tonks4x4

    Range Rover Master Cylinder

    Part No. NTC4991 for the classic Range Rover does anyone know the specs on these items? ie Fluid displacement, internal bore and stroke?
  10. Tonks4x4

    Hello to all from - Tonks4x4

    Hi there I just wanted to introduce myself to everyone on here. I have been working on Land Rovers for the past 14 years My interest started by visiting an RTV Trial for the Peak & Dukeries land rover club many years ago. I could not afford a Defender at the time but I was instantly hooked so I...
  11. Tonks4x4

    Drop Link Ball Joint

    Snap-on 2 jaw pullers. Works everytime 10 min job
  12. Tonks4x4

    Door mirrors

    Sorry just trying to sort a similar thing on a classic Range Rover where the wiring is not like a 200 Discovery and the switchgear does not reverse the polarity to the motors in the same way. However I have rectified the problem by using a 300 Mirror switch and running extra wires for the...
  13. Tonks4x4

    Drop Link Ball Joint

    Well another option which I have used many many times is to make a home made puller. Find a socket which fits through the drop arm but is wide enough to catch the top cup on its way through, Run a bolt through the drop arm and through the socket, Use some thick plate at the bottom with a hole...
  14. Tonks4x4

    Door mirrors

    Any chance of a wiring diagram??? to show how this works???
  15. Tonks4x4

    TC, ABS and HDC all on

    Part No for front ABS Sensor = TAR100060 Part No for rear ABS Sensor = TAR100070 both about the (£50) mark Check for play in wheel bearings/hub though...
  16. Tonks4x4

    Disco Td5 2001 - Oil Requirements

    Autobox = Make sure you can undo the filler/level bung on the front face of the auto sump before draining Manual = Use torx bit make sure you can undo filler/level bung on the drivers side of the gearbox Drain Oil Autobox = Fill untill dribbling out the filler/level bung Start car and run...
  17. Tonks4x4

    Parts book help needed.

    Can you not just use a standard tank on the passenger side and move the battery?
  18. Tonks4x4

    new project

    And I can tell you that it had the best a pillars I have ever seen.... You Bug*er
  19. Tonks4x4

    Parts book help needed.

    It ain't listed on BM Parts book or EPC or the britpart parts file???
  20. Tonks4x4

    Parts book help needed.

    Well it's def a TD5 tank which fits inbetween the chassis rails on a defender at the rear. It will not fit under the drivers seat like a 200/300. What are you trying to achieve?