Thanks for the update 👍😁 Kev

Yes, but they all seem to be 150ml cans? Kev

Hi All, Hope your all enjoying the sun shine! (Below Manchester anyway??😜) Now that Halfords as changed their Paint supplier? And caused confusion in there stores?when looking for your paint?? They have stopped supplying "EPSOM GREEN' (not an angry post 😁). Has anyone on the forum any...

Sorted now. Andy was a great help. Thanks 👍 Kev

Good morning all, I'm looking for the above item? And beat place to ask is the place is owners of the said vehicles?? Seriously lacking in the market at the moment 😕 Any help would be appreciated 🙂 👍 Kev

Happy New Year Sorted 😁 Dodgy connection on the pins, cleaned up now working fine. As said before, could not see at the time! Night time viewing 😵 Kev

Have a hunch that it may be an earthing problem! Will have a look when I can! I checked and changed all above in the dark 😕 so did not see any more that needed checking 😔. Thanks for the heads-up 👍😊 Kev

Question?? Have a problem with NS (passenger side) head lights? No problem with the bulbs! All replaced with new ones. No problem with the fuses! All checked all ok? But! It's not kicking out the brightness! It's on! But not on? Any advise would be appreciated 👍 Kev

As above advice! But I would pick up stock Td5, pre or after facelift! And start to add what works for you for Greenlaning and off roading? Start to pickup tools as you go? Will not be long before you become a qualified Land Rover fix-a-upper/vehicle mechanic. Worlds of experience on here...

You may need a rotary coupler? They are cheap and easy to replace? Kevv

eBay!! £22 upwards? Kev

You will need to raise the the car and check to see if there is any play on the Driveshaft to confirm? Give it a hard pull and push. Kev

Sounds like the Driveshaft?? Just changed my left side front this weekend! With the driver side front also to finish? The noise your explaining? Was the same from my FL td4? Only have the noise from the driver side now? Kev

Hi all, Thanks all for the advice, much welcomed. The bolt has been removed! I had to take to a friend's garage for him to weld a remove it! So no recorded details apart from picture of the offending article 🤬 Even asking him to remove it! It took 2 hours!?!?! Lesson learned for the next one...

Are you replacing the sagging material? Or like me, ripping it out, cleaning and then painting it? As for accessories! I just checked all the bits and pieces and replaced with new if needed! If you start adding? You will need to remove headliner again to sort out the possible problem?? Kev

Have you a picture?? Kev

Have you checked Silverlakes?? Kev

I also have that issue? Have checked, thought I had put the spring on incorrect! They were colour coded to Nearside and Offside but were installed correctly! Then checked the shocks! Again installed correctly! It is just noticeable with no kit in the back! 🤔 Kev

Has been explained in previous posts! Whole weekend trying to get the thing out, with out the us off weld! Kev

@frostythor Thanks for that! Will keep that in mind for the driver side as well, if I start having problems👍☺️ And will look at that if the weld doesn't work Kev Ps: is that from Freelander RAVE??