Sounds like you're best off keeping it

No insults taken here at all, there's always something for us to learn and it's often the most basic things that are missed out. I do have access to good diagnostics at work, but I'm looking at the Alive Tuning interface that also doubles as a quick code reader.

Thanks for the tips Stu. I've been turning spanners in the Royal Marines for a few years now, so should I know a thing or two. I'll get it up on the ramp when I'm back in the UK and take it from there. It was my old man's, so although I don't know the vehicle that well I know its recently been...

Thanks guys, got it for £4.5k in the end, will update with some proper photos and future plans soon enough.

Morning all, I've strayed over from the Series section to ask a bit of advice. I've been offered the above vehicle from a family member for £5.5k before it's traded in. I've not been looking toget rid of my V70 but I could always be tempted to change as its been a few years. The vehicle has...

I bought a new replacement on ebay for not a lot of money, powder coated steel.

Again, tirfor.

I'd suggest if you're going for an annual road worthiness check that you make the repairs and get it road worthy first.

I removed my Salisbury diff without needing a spreader, you might be lucky if you just give it a go.

What size butyl tape did you use? I'm looking to fit a heated screen shortly but had an issue with which tape to use last time I changed glass.

If the truck cab fits underneath the roll cage as shown in the photos, you should be able to fit a bikini hood with just a shark tooth rail and front hoop. I ran that setup for about 12 months with none of the extra gutters/rails around the door tops without issue.

I fitted a shielder bulkhead on my rebuild but wasn't too impressed with the finish. Fitting wise it was okay, but various holes out of place or not tapped as you'd expect them to be. Clearly old vehicles and new parts aren't going to marry up perfectly but I expected better and have heard...

Luckily it was washed away from the ford rather than into it! Didn't even realise until I walked back to collect it.

Needed to wash off the underside of the Series 3 today so took the short trip for a dip in West Acre Ford. Little deeper than last time I went through, but not bad considering the rain we've had recently. Castle Acre Ford was barely above the centre of wheels in comparison. Should really think...

Keep an eye out for a pair of MOD aluminium door tops, window profile is slightly different (Defender style) but they'll last a lot longer.

Length measures 433cm on my 1973 S3 109. Bumper height is 46.5cm to the bottom or 59cm to the top. However, I have got a custom front winch bumper fitted which isn't to exactly the same spec as standard. 7.50 x 16 tyres, parabolic springs but also a bit of extra weight on the front because of...

Got a S3 109 in the drive if you need real world measurements to see how it compares.

Tested how and for what? Voltage isn't necessarily an indication of a good battery.

There's a great little independent called A L Services in Poole, Dorset if anyone is that way. Good service and has daily deliveries.

All sorted, thanks again for the input. Fitted the new pulleys today and did a the 230 miles back home without any issue. Although I now have 3 spare belts just incase. The toothed 10mm belt (Dayco 10A1050C) sits flush with the top of the pulley, no sign of bottoming out at all. I'm confident...