1. brianp38dse

    New Member With A Disco 2

    Hello and welcome :)
  2. brianp38dse

    Hello All - Got a Land Rover.

    Hello and welcome :) Very nice landy there
  3. brianp38dse

    2016 Evoque electronic issues NW London

    Hello and welcome :)
  4. brianp38dse

    Hello

    Welcome back to the mad house :vb-biggrin: :)
  5. brianp38dse

    trans fail safe prog

    Hello and welcome :) often caused by low voltage from duff battery
  6. brianp38dse

    2000 Freelander 2.0 di

    Hello and welcome to LZ :)
  7. brianp38dse

    Rainers Series 3 from Bremen

    Hello and welcome love the pics :)
  8. brianp38dse

    Series 2 won’t start!! Help!

    Hello and welcome :)
  9. brianp38dse

    P38A Aftermarket remote p38

    The battery drain is probably the rf receiver looking for a signal from the remote key if you fix the original ones so the system works you can then fit a second remote switch between the rf receiver and the becm that will stop all signals getting to the becm and waking the system up cost about...
  10. brianp38dse

    Freelander 1 TD4 non start... No pulse to injectors!

    Hello and welcome to LZ :)
  11. brianp38dse

    Hi from Peru!

    Hello and welcome :)
  12. brianp38dse

    Welcome to all member

    Hello and welcome :)
  13. brianp38dse

    Discovery

    Hello and welcome :)
  14. brianp38dse

    Freelander 2 TD4 2009

    Hello and welcome :) Best to ask over in the frelander section of the forum https://www.landyzone.co.uk/forum/land-rover-freelander.9/
  15. brianp38dse

    Hello there

    Hello and welcome to LZ :)
  16. brianp38dse

    I would just like to say

    If its just a crack on the drop edge i would leave it be, who ever buys it may well rip it all out anyway, cheaper just to knock a few hundred quid of the asking price, i have swapped out baths from under the tiles but it is a pig of a job if the bath is within three walls and tiled round the...
  17. brianp38dse

    I would just like to say

    With baths they are the hardest part to change in a bath room so dont skimp on one, a good make is Carron baths they are almost as sturdy as the old cast iron , cheap baths need extra frame work to stop them creaking and moving which leads to the seal going and then leaking and they are made in...
  18. brianp38dse

    Air suspension problems

    If its taking a long time to rise then the compressor is probably worn out you can fit a rebuild kit look at the seller x8r on ebay
  19. brianp38dse

    P38A Air suspension collapsed, alternator not working properly

    This it the voltage regulator for the dozzel...
  20. brianp38dse

    New to the group

    Hello and welcome :) post the question over here https://www.landyzone.co.uk/forum/land-rover-discovery.8/