This doesn't help with your original question, but, if the bulkhead is off, and repaired, really, dont put it back in. Brace the bottom, get it blasted and hot dipped, and youve instantly solved yourself a load of future bother. With regards to your actual question, I too am out of range, but...

With the updates to the 300 timing chest (moving the lip about etc) the belts last well enough for most that I'm not sure the gears are that desirable? This, coupled with, the lack of real damage when the belt goes (some pushrods and, if you're really unlucky, a rocket) it seems hard to justify...

as above, look at the pipes under the bonnet when it does it. see if any are collapsing, then work out why (if they are)

A 300 engine bay loom is about £1k. I doubt it's a sensible answer to the chap to just say "your loom is no good, get a new one" : ( @joec110 - Get the wiring diagram for your loom. Go through it all on the kitchen table before it gets anywhere near the car. Make sure it all works (ie have...

Are we talking a britpart screen washer pump vs an OEM one? If so, I'd be fine with that. I'm ok with the britpart washer pump. I'm not so ok with an axel swap. There is a spectrum.

You want to be finding the right shaped "tuit" for that one! : )

My thing is always... If you mow down a que of "primary earners" at a bus stop, how hard is your insurance going to try to get out of paying out?

And is it 100% factory 300? Not (so far as you know) a dealer upgrade? R380 and discs on the back etc? 48 spline steering?

So yours is 100% factory 300 (not a later mod, dealer or otherwise) and L reg? Do you know the first registration date? (Dvla website says if you enter in the reg). I'm thinking probably June or July of 1994? Although def man's is even earlier!

Trying to work out when the earliest date was for 300 era components. The reason - Dvla has an odd rule whereby IF parts were fitted by the manufacturer to a line within a 10 year period of build, you are allowed to fit them, retrospectively, without loosing "points" on their system. My...

Some L reg 200s at the end of the cycle had disc brakes on the rear. Were the very first 300s only m reg, or were there any before August 1994? What about the r380? I'm guessing none of them were ever fitted to 200s, so would have been linked (in time) to the 300, right? My own factory 300...

I've found the plungers in the solenoid to get sticky before. Follow @Flossie 's advice.

That air is coming from somewhere. Find out where and your problem is sorted. Sounds like a good test / result to me. When it's hot and you shut it down, see if you can't hear anything hissing on any of the pipes as it sucks the air in. I know you've replaced a load of stuff but the air...

I just buy small amounts of eBay. You don't want to use it at 80% either. Curiously it works better when you water it down a bit

I thought the mesh guards were always designed to go on the outside of the windows (for break ins, animals etc) rather than on the inside (to stop internal stuff breaking the windows)? Am I wrong? My windows are also rattly moss covered things, so I wouldn't be sad that all that was gone also...

I didn't think bumpers were an mot thing? I guess if it has sharp edges though... I have a disco winch bumper out the back that I've been meaning to flog, but I'll be further than will be worth you travelling. (J27/M5) Edit - Pretty sure this is the one I have but I don't remember it...

You don't need to hide. Just point out to them that you hold all the cards.

I removed the rear bench seats, so it's not like anyone needs the window open at the back. I'm unsure of how much I use the visibility out of those windows when driving. I don't think I use them at all, but, maybe, I should put paper over them for a while, just to be sure, before committing...

I think (maybe) the render is off the jaguar landrover site. All those shaded renders there make them look smarter than they ever seem to in reality!

The internet seems to think that 88 series sides are what I need. You have to remove a bit by the door that I think is, maybe, spot welded or something (ie fairly easy surgery). There are nice looking pairs on eBay (buy it now) for £120 ish, and rougher ones for less than a ton, but, sadly...