Check the with the supply connection unplugged check continuity or resistance of the element, they have been known following a slight damage to burn out in that area can be seen as a small burn mark/s somewhere along the track. I’d have thought that the high level brake light was a factory...

It is a shame, I don’t know of another LR seller in North Kent, but it’s been a ‘sign of the times’ for many years which is still is, that is ordering parts on line. In Kent’s Medway City Estate there was a LR parts seller, that seemed to have most stuff, I purchased a brand new and complete...

There’s not many places you can get a genuine parts of the shelf, and which may be obsolete, and then delivery in a couple of days, Rimmer’s did it with my few orders taken over the years.

That will work. 😊 I changed my disco reverse bulbs a couple of year ago for fun, the only thing that changed was the colour, a white light with a faint blue tinge, the light was a bit brighter but without any extra range of illumination which I expected. ☹️

I’m So 18 watts / 12 volts = 1.5 amps. And if you still the standard 2x21watt bulbs = 3.5 amps, so the vehicles wiring will be capable of handling the extra current load.

It may look nice when new and maybe see it behind the rad grill. I believe that Allisport products can exceed the specifications of the factory issue item when used in a performance and competition setting in which a quick additional cooling is required.

Tungsten side light bulbs are dimmer than white LED DRL bulbs, if the side lights are LED then there's usually less LEDs than the DRL fitting

I forgot 🤔 to say what has DRL to do with engines, should be in the main Freelander forum maybe 😀

Yes “over heat sensor” but the D1 has it remotely.

1. Standard hydraulic glands to suit. 2. It varies with engine speed, my D1 should be at idle 665 to 735rpm around 6.1 bar, 10 bar at 2000rpm. Check your D2 Workshop manual it could be different pressure. 3. Nope just LR, but there’s after market suff I expect.

I take it your post is regarding your 200 series D1, because there’s no mention of it, although it appears a D2 has slipped into the conversation which you haven’t mentioned either 🤔 Anyway from the horse’s mouth… a LR D1 workshop manual, a list of all the torque settings associated with a...

Interesting so i just Googled the issue and found the D3 and 4 forums have lots of posts on the subject, so quite common and a bug or update required was mentioned, in just my two minutes of looking. 🤔 I remember that I had a bit of a issue with the similar head unit fitted in my 2016 Jag xe, it...

Unfortunately, The OP hasn’t been seen on the forum since September 2024.

For after market DRLs all you need is one of these items below, not a £24.00 pcb supplied without any containment or wiring from other suppliers...

As you need access to the 8 screws per seat and remove before you can lift it out as a complete unit with its motors, gearboxes and flexible drives which are all sealed. I would suggest find out why the seat doesn’t move perhaps following the various electrical circuits at the seat switch with...

As you have found out these fittings come in different lengths, thats possibly because there’s 3 change points with these exhaust fittings for the Tdi. You should have 3 of these items fitted, if so take one off as a pattern or take some measurements when u go shopping My petrol 97 disco still...

So your vehicle the alarm set and in an immobilised state, so the dash LED is flashing while the vehicle is locked? Unlocking with the key therefore activating the alam sounder is normal as the security alarm system is voltage sensing, you will always need a functioning fob to unlock, so assume...

The owner can drive their vehicle away from a MOT test garage which has just failed it, but it must have the previous MOT still within date. If not the vehicle can still be removed but that is on a flat back truck, unless towing is still legal 🤔 As we all know it’s illegal to drive a vehicle...

front fog lamps fitted to vehicles first used on or after 1 March 2018 the 1 rear fog lamp which must be fitted to the centre or offside of vehicles first used on or after 1 April 1980 My disco has fog lamps front an rear but i’ve never used them, l have never driven it in fog 😊 I also have a...

This is what is stated in the MOT testers manual below. So it looks as if it should have been an “advisory” as u have two lamps fitted as only one lamp is illuminated (1/2). If so then it should be the off side that illuminates as with the rule for vehicles with a single fitting. My rule on...