Checked as you said and nanocom has zero reading on air flow (assuming you mean in tihe insruments part. ) Cleared the fault and the fault comes straight back 1.7 . Is there any other tests i can do. Car runs and starts as it should and disconecting makes no difference.

Connected the nanocom evo to my discoo td5 and got fault cod 1.7 air flow circuit (logged low). Anyone got any ideas. I`m thinking it could be air flow meter or maybe somehow because ive disconected egr valve. Anyone got any ideas.

Hi all. Can anyone give me a detailed instruction on how to do a firmware update on a nanocom evo. Mines new and currently at 1.0.7 and looking at ther website there has been two updates and now at 1.0.9. Thing is, i have downloaded(zip file) from website, but despite connecting Nano directlty...

Hi, want to buy a nanocom and possible a nanocom evo if possible has anyone been quoted good prices or know where i will get best discounts.

Quick update. Thanks for all your help now all is working except a slight lean, which i can take out but lifting ride height sensor, so i guess i need to calibrate the sensors now. Desperate to buy nanocom thing now if anyone has one they might want toi sell. Why dont the sensors.

Just an update on this changed the diod pack in alternator and all is good now, charging at 14.2v on start up. So i guess allthough it was charging it was'nt charging enough to sustain use.

Cheers going to have another play today. Thought weather was going to be bad but looks ok at the moment, so going to dive in. £225 + vat is the best price i have found for a new compressor and all though its a lot just want it done but want to satisfy myself that the compressor is no good, be it...

just put two new ride sensors on (original landrover) and tried to hot wire pump pump runs and pumps but just dont want to put it down the airbag line

Hi all disco's failed suspension again. Can anyone tell me what the solonoid valve on the actual pump does. I've tested both of the valves seperate from the pump and they open and close allowing air to iether wheel ,but cant seem to favom what the single one does. I can here it click when i...

Hi all. Has anyone got a nanocom in the hampshire area that wouldnt mind helping me to reset ride height sensors. Mine seems to have gone of the scale one side.

13volts with engine running, most and all my other motors pump out about 14.2v on start up, so thats why i am thinking it my be alternator.

MMMM came hope tonight and slowly all my dash board lights came on one by one, abs , traction etc all started to illuminate (all the yellow warnings) .Pulled over straight away could not find anything obvious at roadside, so went to start engine and baterry was totally flat. My mate jump started...

Hi all can anyone tell me a definative list of oils specs and grades for Landrover Discovery2 td5. Looking to change all the oils this year, diff, gearbox, transfer etc. I have done clutch/brake and power steering/ace and regually do engine, but i know some manual specs are superseeded. Texaco...

Quick update. Car went back up on ramp and was completley stripped down again. I measuresd the gearboxshaft and it was 7/8" well actually 0.874", then I measured the bore of the spigot bush now fitted to the end of the crankshaft (using a bore mic). The spigot bush bore was too small, measuring...

Hi all. Well finally put car in garage and had new Valeo clutch,flwheel,spigot bearing, release bearing(nsk) and a new slave cylinder. Clutch pedal is nice and light and clutch all seems to work as it should however there seems to be a horibble screaming noise every time the pedal is depressed...

Hi everyone, looking for someone good to fit new clutch/flywheel to my disco td5. Anyone got an idea how much and is anyone willing to give me a price. Car is in Hampshire. Just stared slipping this weekend when i towed my mates mini-digger back for him.

Hi all, just broke the rear fixed window on my 1999 disco 2 td5, that/s the window on the drivers side rear. Can any one tell me if i can refit myself or is it a professional job as people are telling me that this is special seal not like the disco 1 which had a conventional type seal. If any...

Hi all hope ya had a nice Christmas. Coming home the other night in my td5 disco and i noticed clutch slipped on droping the pedal acidently. Does anyone know how much to supply and fit am new inc flywheel. Cheers Mark

Hi steve, cheers for that, but what i was intending was just to change the rubber keys and may be the outer case and keep all my original guts. Cheers Mark

Damn cat, just eat my lock button on my key fob. Been straight onto E bay to get replacement, but they only seem to sell spares for the simlar Rover 75 fob. Has anyone ever replaced this and ifso where do you get spares. No doubt main dealer will want to sell me entire fob and reprogramme!!