Good Morning All I am fitting a heat exchanger to my discovery 1 as i am running on veggie, i have used 8mm Stainless steel for the fuel line but i need to connect it to my lift pump. I need to know what the thread is on the pump end please? (i would look but the disco is elsewhere and i...

I will take some better pictures of the fins tomorrow and post them, they were fine last time i looked and it didnt leak. Rob

I have compaired the part numbers on my local dealer web site and the Rad numbers are the same, the steering box is if its the 4 bolt type on your defender and not the 3 bolt. Cheers Rob

How about £70 all in matey?

All the items are located in Kent, near tonbridge. If you want items courriered we can sort something out.

Hi all I am braking a 200tdi at the moment as the body was too far gone, i have the following parts and i am open to offers as i am moving so anything that dosnt go is going to the scrap man.. Condencer unit (un-tested) £offers Radiator (was fine when the disco was running)£offers ABS...

i have sent you an e mail matey..

Chaps I have a Harrison 9"swing metal lathe for sale, has some tools with it and a 3 and 4 jaw chuck. It is 240v. I am wanting £450 Ono The Lathe is located near Tonbridge in Kent. Rob

Hi All I have a 200TDi engine and gearbox for sale, thought i would offer it on here before putting it on ebay. I havent started it in a couple of months but ran fine last time i used it, the gearbox was good no loud crunches excetra. Looking for £250 for the pair. It's done 138,000miles...

Hi All I have just purchased a landy heated fuel filter and was wondering if anyone would have the wiring diagrams for it? Cheers Rob

I have a leak from the joint on the metal hose bit on the pump, its the bit which comes with the pump it is held to the pump with 2x M6 bolts. The hose is part number ANR3133 and joins the bottom of the resivour to the pump (fixes with jubilee clips). I have had the 2 M6 bolts out and there is...

Sorry should have said my 300 never came with a remote.

Hi All I have 2 discovery 1's, one is a 95 300tdi and the other is a 94 200TDi. The 200TDi is unfortunatly scrap as it has too much damage to save, it dose however have remote central locking. My 300TDi has only key central locking, can i install the remote central locking from the 200 into...

Hi all I have a 1995 300TDi which requires the suspension replacing (its still on the original springs and shocks), i would like to lift it 2" but i have some concerns: 1. How will it handle towing a 1.75T caravan quite often? 2. I cant afford bigger tyre’s yet will it look silly with the...

Hi all I have got the MOT coming up and after a lengthy argument with the local MOT inspector about the repairs required to my mates disco i thought i would get some advice. The Boot floor is corroded in the usual places and as such i need a new floor and both side panels, my thought is to...

Hi All I am going to replace the shocks and springs on my 95 300Tdi as they look to be original and she is rolling all over the place. I regualy tow a 1.5ton caravan with her and do allot of greenlaning, so i am looking for a set-up which will work for these conditions. I was looking at...

Hi all I have a 95 disco 300tdi and a 94 200tdi the 300tdi has key central locking whilst the 200 has remote. The 200 is been scrapped can i fit the remote central locking from it to my 300? Rob

Ok thanks So where would you recomend we go if not Strata

we both have AT tyres i am on the look out for some Mud tyres

There are acouple of us going, we are using standard disco's 1 with lots of recovery points, a winch is fitted to one, we have loads of erecovery equipment we are both members of 4x4 response.