Hi im looking for a bit of advice on a weird starter motor problem. The motor has been sitting in my garage for about six months and the one on the car is knackered so I decided to rebuild the spare one. When I benchtest it it's got plenty of power and the solenoid kicks the gear out with a...

How much do u want if u post it

Might be the same. Mine is missing but I think it looks like this

Has any one got a Discovery 200 tdi viscous fan Cowling for sale.

Just got round to looking at the oil fault and taken the oil Thermostat Off and it only got 1 washer in so put one more on and replaced the oil filter. Didn't look at the pressure valve cus I forgot it was in the pump but I looked at the old pump and it's just a piston with a spring so don't no...

Was lacking in power so checked for leaks on the boost pipes and cleaned the air filter witch made no difference so adjusted the turbo actuator 1.5 turned and now I can go up hill quicker than 40mph. :D

The gauge is new so I'm guessing it's right

Think it was 10psi. Don't no what the max was

It's the 70psi that bothering by. I can just Imagine it popping a seal in the turbo

All the bearings were replace but the cam bearing were done by a specialist so don't no if there in right but it's too hard to check so they r staying like they r. I like the Idea of changing the oil. I didn't know what the number meant for the oil type I will still check the prv when I get a...

Ok I will check the prv is a standard set up and if it is I will do a oil flush and hope for the best.

So why dose the book say max 55psi and I got 70psi when cold. I thought the valve will bring it back down to 55 in till it's gets hot and sorts it self out.

If I put thinner oil in I will get less pressure at idle and it's only at 19psi at the mo that's why I think it's a problem with the prv but I don't no how the valve can stick shut. Be for I rebuilt the engine I checked the spring and it was in limits.

It's not a problem when it's hot. It's when it's cold it's at 70psi when at 3000 revs

I've got a 200tdi disco and mine bolts on the inlet manifold and they go in all the way

Just went on a test drive and at 3k revs it's 40psi and on tikeover and in drive and not moving it's 19psi

Hi I've just recently rebuilt my engine and now I have put a new oil pump on because the oil pressure was still too low when the engine was hot but I've just started it with a new pump with the engine obviously cold the pressure goes up to 70psi is this right or have I got a problem with my...

Got myself a mot and some tax yesterday then today I replace my oil pump with a bran spanker whilst my mate did a bit more structural work on the roll cage. Just need to go on a test drive and hope it dose the trick. I've recently rebuild the engine but was too tight to buy oil pump so feeling...

Think it's a bit over the top if I'm using it on the road. Thanks for all you'r help anyway.

If it's to protect your radiator why do they point forward.