cheers Wammers, i did that before posting original ? only one i could find was 49.99 plus postage. was hoping someone on here had figured out the wiring to tell vehicle it had been converted to manual springs jim

ha ha, very good however i aint suffering its me mate that is lol

hi everyone, any one got the solution to getting rid of the " eas fault slow 35 mph " on dash after a change to coil springs, all bits for the original air suspension have been removed ie valve block, compressor, height sensors , and ecu under passenger seat, trying to do a mate a favour and get...

yes i know its not the out station but thats as far as i can check with the t4 perhaps im doing something wrong with it as only had it a few days i could be wrong but if the door catch/motor was at fault surely it would'nt lock and unlock the rest of the doors when operated manually , and im...

thanks for your quick answer vougese39 however i have my own t4 mobile+ and when i do a check with it on passenger door it come's up with and i quote : no communication faults found in nsf outstation hence why im now looking for the actual lock and unlock colours so i can track the wires and...

hi all ,can anyone tell me the colours of the lock and unlock wires in the passenger front door at the door motor as can only seem to find one wire which gives a + pulse on lock but cant find any giving one for unlock :confused: i am assuming there is possibly a break in a wire somewhere as all...

hi, just thought id let you's all know i have stripped out old corroded board out of becm and replaced with the top board out of another becm reconnected and hey presto started up and faults all gone , ie windows working , heater fans now working, and fuse 2 failure error message gone from dash...

hi datatek, further to my earlier ? regarding swapping top board from another becm do you think this is possible with no worries regarding keycode lockout etc etc regards jim

hi dougdotcom. i live in kilmarnock sunny ayrshire ( or so ive been told ) jim

hi,what is the problem with your car ? i take it its suspension related ? regards jim

Oh and by the way thats it looking nice and clean now !! silly me should have took before and after pics .DOH

cheers for that bit of info Sean , :D any ideas can the top of board be changed with one from another car without any interruption to keycode and things like that ? cheers jim

thanks datatek for your quick answer, ive had a look but dont possess any type of magnifying glass , however ive took a picture of the offending part of the board not the best one i admit but im thinking there might be a problem under the big relay you can see in top left of pic that yellow...

hi, good evening hope some one can help me , i have a 2001 on a y plate 4.0 with the error message on dash saying fuse 2 failure . ive checked and replaced fuse to no avail, so i decided after reading all the posts on here on similar problems, to remove drivers seat and remove top off the...

thanks, for your reply's datatek & jamesmartin. will have to have a think wether to go ahead and get another box or get this one taken out and repaired or just sell it the way it is regards jim

hi everyone, wonder if anyone has came across this fault before ? when i select drive there is none at all , however if you select 1st gear and pull away you can then select drive and box will change up and down gears all day . until you stop then you have to select 1st again to move off again...

hi,im no expert but had same problem on a range rover a while back did pressure test and sniff test, all showed ok but would sit and tick over all day if asked to , but as soon as you drove it and gave it the shoe, up the temp went, so to cut a long story short replaced radiator with a new one...

hi, has anyone came across this diagnostic fault code it has came up the number " 1 amount adjust mechanism ???? " any help on this would be greatly appreciated as anyone ive spoke to has never heard of such a dtc before its 0n an 99 t reg 2.5 dse , and the problem is that it seems to have a...

hi, anyone had this fault before ??? car starts ok when cold and been lying a few days but after running for half hour it just dies, and when trying to restart it coughs and backfires as if timing is out, previously had tank pump diagnosed as having low pressure so dully had brand new tank pump...

cheers thanks for your info will give it a try regards jim