If you'v only got a hand full of HP and a yellow knob as on the older landys then they are worth it but for the newer landys then with perment 4wd then there is no point. On my 2a it makes the differance of 5mph on the topend.

Just leave it open to the air. My 1964 2a has a K&N and it works just fine without any Crank case breather pipes.

This is a 7:1 head and the 8:1 head has a tab in the casting here.

Off the top of my head a 7:1 head should be around 125psi and i cant remember what a 8:1 head should be. Anyway the point is you have to know which compression ratio you have before testing. You should test the pressure on a hot engine with all plugs out and turn her over with the starter.

Sorry couldnt drive and take pics. :-) Ps Every time i tried to take a pic of me landy a kid got in the way. Bloody attention seekers!

if it turns out to be the head gasket dont worry they are cheep and quick to change (about 1/2 a day)

and some more

ErYa go some more

Better than the first time through. I nearly stalled twice the first time.:)

Here is the whole group Good day guys Thanks Ps Will post more later

Don’t dick around with sealants and miracle goo. Get a head gasket kit £10 to £15 The only new bolts needed would be two “mod bolts” of the shorter head bolts with the heads ground off and a slot cut in both ends (One slot to use with a screwdriver and the other slot to clean...

Space is limited but we hope to run two groups of 4/5 landies but with the guys who came to the Pub meeting that only leaves a couple of spots so its on a first come...

Ooo you dont want that type. Send it over here and i'll get rid of it for you. :-)

WooHoo the inlaws arnt comming down on Thursday so i can go out to play. :-)

Aye Between support rail and Chassis

:-)

Never had to be towed / recovered in my 2a (Touch wood). Been on runs where sorted defenders and jacked up discos got stuck but not my standard 2a. Of course that could be down to the driver :-)

Aye the bulkhead looks ok for a 2a but i would like more pic of the engine bay and cab to be sure.

Ta i'll put in me Calander :-)

Sorry mate this is a 64 But still a nice one