Unless the "puff " bottle they refer to gives the nylon a charge? Not sure

Anyone used this to refurb the pillars ? Renew Flock Finish with DIY Flock Trim Kit Nightshade adhesive, flocking, puff | eBay

Headlights pop out easy enough just be carefull not to crack the knuckle holder and if you do a biy of grp fixes it easily enough ;)

I bought a screwdriver from BQ of all places for 6 quid but on rebuild used a stainless allen bolt ( supplied very kindly by Irishrover) also if the ducts are cut in the right place it allows the blend motors to be replaced in about an hour and a half :D

What about if there was a metal clip on it would it react with the acid to produce enough heat to melt it of crack it ? Seems unlikely. Mine leaked here but that was due to vibration and erosion on a bracket nothing to do with battery acid

Oh and welcome and where are you etc etc etc etc

Have you ever driven on the bump stops or off road fast?

To be fair hope all ours do ;)

Must admit I have had my p38 for 9 years and done all sorts and never had to adjust headlights but have had to replace bits of the EAS bit like triggers broom :D

I have run my 4.6 for 9 years and 120k miles with a can of foam mmm might need replacing do they go ouet of date:D:D

I thought that too think it will be replacing centre box for 40 quid then:D

More than diacalm methinks surely the middle box does more than just muffle sound

Has anyone tried this removing the centre box range rover exhaust mods - YouTube

Yep you can adjust but the whole concept of self levelling suspension is that they dont need it - adjust the headlights and you are good for all conditions

They all have 5 wires

Might give them a ring

Interesting that everyone seems to be happy suppose it comes down to cost

Hi gents many posts read most but wondered if there is a manufacturer /fabricator who seems to be best ?? What are experiences

If you open up the blend motor you will see that two cogs have dot/lines on them make sure they are aligned before you cycle them or it all goes horribly wrong sometimes and no idea why cogs jump and once they are misaligned show as a fault when in fact there is nothing wrong with the motor.

Replaced the sensor when I took old one out it just span so had to nibble the plastic of it was full of white oxidation crud no wonder it was confused see what that white powder does to footballers :D:D