yeah please, pm me with payment details and i'll get the money sent!!

Need a driver front outer door handle with the little rods etc if you have one?

do you have a full lockset working off 1 key?

any luck?

Did you get some shims to set the pinion?

Cage is now in etch primer so will paint it tomorrow after work and hopefully refit it Saturday morning

Slider are bolted through the sills and have added supports to the out riggers, but on th list of things to do are replace the sills with box section, but the sills are in very good condition and I made the sliders a while back and the slider tubes are also made from cds, The amount of tube I...

Yeah think I'll add a tab of metal and bolt a pin mount on tthe rear hoop should help stop it being ripped off, gotta have toys mate!! Yeah I'm on pf,I'm quite surprised how many users from pf are on here as well

Cheers Nah it"shouldn't" but thats part of the reason to tag it to the B pillar to help reduce any twist

Almost there now, just need to pull it all apart to fully weld it then a quick paint up and it done have added a loop for the winch hook Will tag it to the B pillar also I think just to add some extra strength Will add a cb aerial mounting but not sure if I should have it on the roof...

Ok mate, handles are different I think, but let me know how you get on and we will go from there Cheers Mat

Nice one, how much and is it 1 key for all locks? Cheers Matt

as above I need a full lockset for my disco 1 300tdi

sods law indeed lol

when I did mine I used a bit of tube some washers, bolt and a bit of heat and the pin fell out, if it was me and the bolt had snapped id cut down the side of the 3 bolt flange and replace with a 4 bolt flange and 200tdi prop

Cheers matey! Slower than I would like but yeah not much left to do really, The rear cross member is totally rust free! It's got the reinforcing for the NATO hitch as well as the 2 bolts for bumper mounting but will see how it goes as I've got some 75mm x75mm x 3.2mm box that I can add from...

Todays little bit of progress mounting point off rear bumper made up from 6mm plate and some 3.6mm wall tube then bolted through the bumper then bolted through the tube as per pics Its taken almost all the flex out of the cage and bumper already so should be to solid once another 12...

this is it

It was a baileigh mandrel tube bender so the tube is supported both sides the whole bend

will sort that once the rest of the cage is done!:D Cheers Spoke to me mate about using that type of bender and all he did was take the ****, He said its fine for small stuff etc but as you have found out they aren't any good for bigger stuff as it just flattens the bend, if it was me...