Potteries diesel up in Stoke do them . They did mine and the injection pump .

According to eBay britpart do a repair part for the seat box bottom and the inner sides about £140 though , can't post a link as they don't come up on the app or I can't see it . Put defender seat box in and hit search should come up company called bml is selling them.

Cheers Dan, only made the side panel myself the footwells were brought from a company.

Thank you , i did cheat a little I'm a fabricator/welder by trade .

So a bit behind here took the foot well out last week decided a new side panel was needed so made one of those then did a test fit of the side panel all good so yesterday tacked the foot well and side panel in for a test fit and made sure the gearbox tunnel part fitted properly upto...

The white plastic nuts are what the dash screws into its item 5 you want part number AFU2692 http://www.brit-car.co.uk/search.php?query=afu2692&xBrand=&part_type=&xSupplierID=&product-sort=&xPerPage=10 beat me to it

Yes exhaust fannymould drilled right in the middle below were the turbo sits on, ahh just realised from some of your other posts above yours is a 300tdi isn't it mines a 200tdi so no EGR and turbo is on top of the manifold so limited access . The access might be better on yours.

I've drilled and tapped mine did look at doing it whilst still in the Landy but thought there was to much room for error and didn't want to knacker the manifold . Also didn't want any swarf gating in the engine or turbo.

Bump

Last few photo's of the chassis so while waiting for the rear 1/4 chassis to come thought I'd start on the bulkhead new footwells and on to the PITA job of drilling all the spot welds out can't make my mind up whether to replace the footwell side panel or weld a bit in ? cheers Ian

Go for it you only live once :D, when deciding about things like this I always ask myself when I look back in years to come will I sit there and say why the heck did I not do that ,life's short so enjoy it while you can .

Hi all got some unwanted bits off my new project terrafirma 2" lift kit with rear dislocation cones £100 now sold mantec snorkel £50 side step/bars £50 now sold all in good condition the suspension bits are about 2 years old collection from Stafford pics below cheers Ian

Used one of them Irwin sockets on one of my torx bolts as it wouldn't budge came out real easy wish I'd thought about it and used in on both would have made life a lot easier. Will find out if the pumps differ my new project is a 300tdi so when I get round to the engine I'll have a look before I...

That's all I had in mine lynall , there must be a difference between the pumps on a 200 and 300 tdi , I think that's a 300 tdi on that video isn't it ?

very nice :D

Hi all , all welding done on the chassis except the rear , I'm fitting a 1/4 chassis so waiting for that to come missed the front end the dumb irons are done will get a photo of them tomorrow and nobody panic I took the photo of the front arb's before I welded them :D.

Yes agree with that one Flossie none of mine fit properly looks like the hinge holes are slightly out , they work but they look out even the left and right side don't hang the same and I've measured the door openings and they're the same even checked them against 2 other defenders we have and...

Same as Flossie I didn't fit front door locks so left rear door so access could be gained if the central locking failed.

Did all 4 when I rebuilt my 110 csw the channel in the door is held in with self tappers make sure you get them all but all in all it's not a bad job just fiddly.

I think on the fuel tank issue that I've read somewhere that you can buy a ROW fuel tank sender for the 300tdi which enables you to use a td5 tank but not fit the in tank pump, I think this is possible because Land Rover still fitted 300tdi engines to ROW speck Defenders when they had changed to...