I used Keith Gott close to Alton (Hampshire) a few times with my previous D2 and was very happy. Was just for service rather than repair, as I was blessed with more cash than time then! He also helped me with a bit of a lemon of a 110 CSW that I purchased from another dealer, which was...

Hello, the outside bolster on the driver's seat is decomposing, and I want to replace the foam on the base only. I have seen a number of replacements are available, so my questions to the forum are how to best go about it. For context, the seat is in a '04 D2 Td5, is heated, and fully...

http://www.discountcarstereo.com/AUX-BKR.html was what I used.....

Also, I did investigate the option of adding a 3.5mm jack directly to the head unit, but the company does not offer this on the Becker Traffic-pro

My kit was a pass through, retaining (not replacing) the multichanger. I can hear the multiplayer changing discs etc, and it still plays CD’s, but when an input is provided by the 3.5mm jack, all you can hear is the Aux device.

Is it the satnav Becker? If so, then just play something through the 3.5mm jack whilst selecting CD....

If only I had a FB account....

@neilly - I normally have a couple of grey flat plates (6 studs by 8 studs) over each roof, but took them off this weekend as I didn’t think it would rain....

Got recovered from a park near Windsor at the weekend, apparently I need a new blue flat 2 brick.... anyone have one spare?

Thank you @tom1979, much appreciated! Good to have a benchmark. Also allows me to consider both unconverted and converted, what to look for and the premium for already having the option on the vehicle.

Speculative question.... Currently run my beloved D2, but looking at the potential to go D4, but purchase through my company as a Commercial variant or "Panel Van". Clearly there are issues I need to address concerning the VAT, Corp Tax and BIK, but putting that to one side, has anyone any...

Plus 1 to Dynachip.... if you have an auto, it’s the great feeling of pulling from 50 to (insert your own speed here) with the TC locked.. bucket loads of torque and doesn’t sound like a speedboat....

Cleaned it ready for a weekend with my children..... Or should I say.... had it cleaned!!

Have a look at the link I posted, I added in the details of the products, and also the install instructions (which may be useful to you in their own right). The lead wasn’t cheap, but it works and achieved everything I wanted without chopping the loom or binning the CD changer. May not be...

https://www.landyzone.co.uk/land-rover/solution-bluetooth-on-oem-head-unit-with-cd-multi-changer.319589/

I purchased a plug and play lead that achieves what I think you are looking for, I retained the cd changer and inserted the lead in-line. When a signal is sent via the 3.5mm aux input it mimics the CD feed. I inserted the jack in the cubby box so all 100% factory look. I use a Bluetooth...

To celebrate a clean MoT and complements on the state of the old girl from the tester, I plan to celebrate by getting the seat bolster /base on the driver’s seat replaced. Does anyone have any experience of any trim shops in the SE London/Kent area that would strip the seat base and replace the...

If found that if you are in a hurry (and don’t want to wait the 30sec or wake up the street at 5am) then pop the key in the ignition and turn to position II and back again then lock. Seems to work for me.

+ 1 to loving it.... low ratio, diff lock, TC, had it all going on... really great! Plus toasty seats and CC set at 26 deg!

and took her for her MOT....... just an advisory for a small oil leak...... phew....