They look very good, nice job. Headlining is a touch tricky around grab handles but looks so much better once done.

Treated the old girl to an oil and filter change, went for halfords Classic 20/50 this time , have read some good reviews on some V8 forums, it's designed for the older engine and the rover V8 is an old design . Comes in an old fashion tin like they used to in the old days, only £15 for 5 litres...

Re trimmed my headlining last week, you are correct, looks so much cleaner inside now, bit of a sod to do around the grab handles but take your time and all will be well.

Excellent, thankyou.

Yesterday dropped head lining board, just waiting for new material now so i can recover and refit . Also purchased new battery, and managed to get a full set of wheel arch spats, has anyone got any suggestions on the best type of mastic adhesive to use to glue the spats on with? Had to dip...

Hi, Just a thought but have you checked the white block connections behind the passenger side footwell kickplate, they are notorious for getting damp over time and the pins turning green it can cause lots of problems with the EAS, i too was having headaches with mine when i purchased it so i...

Sorry Saint, forgot to do that, but the transformation is excellent.

Fitted new Valve block and Pump from Kurt , no more air venting fronm blue pipe.

Didn't try it those Brian, may give them a go tomorrow

hi chaps, if like me your frames have discoloured , gone flat and no shine I have a little fix for you. I was thinking of respraying all the frames cos they looked awfull, sort of a bronze colour with no shine to them so I reached for the Auto Glym paint restorer, I thought if it did not work it...

When I replaced my valley gasket I did over a couple of weekends meaning that the battery was disconnected for a while , when finished and I fired it up mine also ran rough on tick over for a few days, I think it does that whilst the ECU relearns the fuel trims. May be worth driving around for a...

The old girl passed MOT again , no advisorys, that's thre on the trot now, took delivery of my new valve block and pump from Kurt. Roll on Saturday.

Can't seem to get these bloody smiley faces to work?

Sorry Alan, my bad.

Just a stab in the dark but, it's not for the driver pack is it?

Very thorough Grrrr, you certainly like to get to the bottom of things.

Four new boots fitted, new headlamp wiper blades, oil change and new air filter. MOT next week , fingers crossed. Has sailed through the past 2.

Treated the old gal to four new boots and headlight wiper blades for MOT next week, going to do a full service at the weekend , and also have purchased a brand new valve block and compressor from Kurt so my EAS is all virtually brand new.

Rick The Pick is the man to sort your problem, believe he is based in Brighton . He is a member on this forum so do a search for him and then you can pm him. There is another chap called Marty who also repairs BECMs but is away for a few weeks.

I might be wrong but if EAS has gone into hard fault the pump will not run until fault is cleared.