Thanks Turboman - I’m going to check all earths and wiring before getting involved with a new Alt - not touched any of it for over 4 years. Rich

Thanks Steve will do. I’ll crack on testing continuity before condemning the Alt. Rich

Ahhh - so Alt could be knacked? Rich

Hi all, so I ‘think’ I know my issue but would like to check with you knowledgable peps on here. So the other day tried to start but Bty was flat. So changed to a good spare, flat after a few days. Starting checking the Alt and it’s giving out 8v with minimal Amps so I’m thinking Alt. But...

couldn’t have sold it to many £££££

For info there’s another one on, 24v Wolf by the looks of the part numbers https://www.ebay.co.uk/itm/314430143115?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=kBE3FOotQvu&sssrc=2349624&ssuid=kBE3FOotQvu&var=&widget_ver=artemis&media=COPY

Just a shout out to let you know of a fab company that you can get all your oil seals and bearing from for half the price. Ive had a Fairly overdrive clutch bearing and recently 2 x Aero parts Capstan oil seals for £4.20 (Was £15 on another 'bespoke' landy spares website...

Blimey that didn’t last long - must have got a good offer

Hi all, just been perusing flea bay and came across this for all your 24v Wolf peps. Cant see it staying at £15 :(...

Thanks, great news. I’ll try that Rich

Happy Christmas all, My recent Christmas present from the Defender is a leaking adjustment bolt which sits on the top cover (Gemmer 6 bolt) and around the steering adjustment screw. Any ideas were i can get a new nut rather than the whole service kit for £20? Thanks in advance

Ive also got Wolf wheels on my early 90 - studs still the same and never had an issue. Rich

Until you compression test you cant really tell. Can you feel / see pressure from the dipstick or oil filler cap when removed? Rich

Already done - water and all sorts came out. This is the second flush so nice and clean (but tinted with swivel grease). Rich

Tottot thank you for the reply, I’ll leave well alone, it’s only getting slightly damp every so often. I knew the oil migration happened on the rear but not the front. Many thanks Rich

Thanks for the reply. As you say, I’m not to bothered about the mix of oils and grease, so may leave it until I can be bothered to take of the housing and replace.

Morning all, I think i know the answer but recently changed the axle oil (Def 90, G Reg) and when checking the other day its was nearly black again. I do have a slightly weeping front right swivel seal (swivels have 1 shot grease in) so i'm thinking the axle oil is getting into the swivel...

Ive got a fuel gauge and temp gauge - Both 24V. If you PM me i'll send a few photos. I paid £70 for both (same to you) or £35. Rich

Hi are you still looking for fuel gauge? I came across one at Newbury 4x4 (sold as a 12V) but its a 24 Volt. Rich

I'm afraid it's a gamble. Some glass comes as 4mm and some 5mm. Best way is to remove one. Rich