Hi, I have a range Rover 4.0 SE Petrol, Its a Rangie which i havent use, placed a battery on the car to get the boot open, but the button seems to be stuck in, no spring action/travel , but the boot/hatch wont open. I can get inside so could i open from inside? Cheers Colin

How would anybody know that i have fitted it, i was then getting a local LPG engineer to pass it. When i had a Range Rover with LPG, the MOT tester only did it with it running on petrol (but that was many years ago).

Hi, Bought an 4.0 litre engine and LPG kit recently, the theory is that im going to transfer the Kit over to my running engine in my car. It seems simple, but something will not go to plan. My first thoughs are to change the inlet manifold over with injectors then check thing as i go along. My...

Hi, Yes i was aware about battery conected, but you need to turn ignition on while doing bleeding process. Never done brakes with ABS before, so its new to me. Quite a long bleeding process, that rear bleed nipple ABS, that looks awkward!!!!!!!! Found a fuse blown (60amp next to the yellow...

Hi, Just to give you all the info, to get at the bleed nipples, (master cylinder and front and rear ABS), i released the fusebox, and header tank for more room to get a pipe on these nipples. When moving the fusebox i did hear the sound of a spark, something live touching earth for split second...

Hi, Update on replacing my brake pipes:- Well i lost time with weather Wednesday raining all day, the flaring tool i ordered off the internet was crap, in the end a mate had the good type from (machine mart, Laser £39.59) which also can be used on the car, to (re-flare ends) Got all pipes on...

Hi, Update!!! I have called it day for now, getting cold. Went back out and tried again to raise the car, it worked the only difference was that i sat inside while doing it. Its been a pain, even getting plastic fixings out (plastic wheel arches) then it took me ages to get my front wheel off...

Hi, Thanks everyone for replies!!!!!!!!! Just had a bite to eat, came back out, and my rear suspend has dropped to the bump stops front still on high setting, Had bonnet and boot open.Started engine thinking it should lift rear up, but nothing doing,dashboard showing all four light flashing...

Hi, Been out this morning, finally found were the leak was coming from (the pipe which turns and goes underneath pertol tank towards nearside wheel) i would say all my pipes need replacing around my offsde wheel and connect part way towards the front as previous replies suggest. Any advice...

Hi, Driving home tonight, alarm came up, "Low Brake Fluid", when i investigated, i had fluid dripping from just in front of offside rear wheel. I havent looked any further into it yet, so im guessing that i think a brake pipe has been rubbing some were around that area. Is the brake in one...

Thanks for replies!!!! Found reason for lost of water, my heater hose was routed the wrong way and was rubbing against the tensioner pully (ground an hole in the pipe) During this i was checking wiring to find reason my temp gauge wasnt working, i thought i needed to fit the single wire sensor...

thanks! I far as i know its my original loom, my engine has the Green Plug with two wires, and the Black plug within the manifold, were the single (wire) temp goes is plugged and has never had a sensor fitted, i dont know what year this engine came from! i have changed the green sensor with...

Hi, P reg P38 4,0litre, petrol. i cant find any spare wire from the loom, a member said the Plain Green wire from the plug underneath the coolant header tank is the temp sensor wire ( as shown in picture) i have just put my meter on the wire and i have a reading from the green wire which goes to...

Hi, I need help! I replace my engine last year, and were the engine temp sensor is normally fitted it is plugged, i used my old wiring loom and noticed at that time that i had no wire to use anyway,so i thought ok! the norm. Gets it all sorted noticed temp gauge only worked went it felt...

Hi, gfromleeds How much would you want for yours? PM me if you want.

Hi, Thanks for replies! I will check tomorrow and let you know, i will get myself a handbook! Colin

Hi, I have a warning 20mph and bleeping!!!!! But my suspension seems to be ok! It will adjust up and down and stays in normal road mode all the time. Any ideas or advice?? Colin

Hi, Im having problems with my temp gauge, works went it feels like it, but mostly not at all, changed Green temp sensor (is one wire for ECU and the other for temp gauge?) I havent got the single wire sensor fitted or any spare wire from the loom. Any ideas lads? Cheers Colin

Hi, Right i was thinking that the green was for the ECU and the single wire was for the dashboard, each engine had both!!!!!!!!! So i will replace this sensor and let you know what happens. Colin

Hi, My temp gauge works sometimes, and will just drop when travelling along. From prevoius thread the dashboard temp sensor is the single wire one (inlet maniflod) near the black-multi-plug, so i removed the one from my old engine to fit in a recently replaced 4.0 litre engine in my car, when i...