Hi, I realise your concerns, my intentions was to do the donkey work, Tank, pipe work, inlet manifold, position parts within engine bay, i have wiring loom and ECU from original LPG car. then take it to Yorkshire Autogas in Hull for certificate. Colin

Hi, I have tried to register on this forum, but doesnt accept my email address, it does mention this, but it was maybe a year ago,so i cant put any threads on this site. Colin

Hi, A while ago i bought an 4.0 litre engine with an LPG kit , at the time i had just fitted an engine to my Range Rover so never go round to fitting the LPG kit. The time has come where i want to do this now. I thought i would fit the tank, then swap the inlet manifold for the one which...

Hi, Im going to try and inflate my airbags Monday night, this should high-light any problems with my airbags/pipes,etc. While i have the car off the road (a month), i was planning to fit a LPG kit to my car, i will start another thread for advice on this. Thanks Colin

Hi, Do we know what sort of pressures are required, i can start low and work my way round. Colin

Hi, I will check my rear sensors, regarding the pipes, im i infalating each bag individually, so i need four valves one for each pipe. I thought i was going to use one pipe to raise all four bags at same time. not a problem just want to have all the equipment at home tomorrow. colin

Hi, i have had look at the fuses they seem ok. Had a glance at my valve block before work, five pipes all numbered and colour coded, which pipe supplies air to the bags, had a look in rave but having trouble finding that info. Thanks again for replies!!!! Colin

Hi, Frostytel. Im wanting to do the same, manually inflate my airbags, could you describe the fittings you used, is the pipe 6mm to the bags, i brought some valves from work, but are big and bulky. did you buy your fittings from ebay? I have a regulator what pressue did you use to inflate to...

Hi, Is they away of inflating my airbags manually, would i have to do each airbag at a time or can i do them altogether, I have got some pipe and valves from work, im just thinking it will give more time to sort fault problem out. Colin

Hi, Thanks for reply, how do i find the faults. I do have EAS FAULT on dashboard, MAX 35 MPH with all four small lights flashing, and on bump stops. colin

Hi, Ive had a quick look at my suspension problem, the compresser isnt running when engine is ticking over. I have checked fuses F44 and MAX fuse 2 seems ok visually. I then checked compresser with spare battery to compresser plug terminals, the compresser ran ok. What is stopping power getting...

Hi, Tried running car with door open, two lights on access/standard, after 10ish mins closed car door, standard light started flashing, then after a few seconds all four lights started flashing then message EAS FAULT. I will check compressor and diaphragm next. Thanks to everyone for your...

Hi, Havent looked at my car yet, its dark by the time i get home. Just an update, after i got home and tried my car again later, it just stayed on the stops, front and rear. The indicater light (Standard) just flashes. Does this throw any other ideas what could be wrong, is un-likely all four...

Hi, Is this a big job, any advice or special tools required to do the job. cheers Colin

Hi, Came out of Tescos today and my Range Rover was sitting down (access height i think) at the rear, bouncing all the way home, front was ok. Just want heads up on the order of fault finding. I have had this problem before when left over Christmas, but seemed to sort it self out, on the way to...

Hi, Just an update on what i found today, decided to check plugs, facing front of car, lefthand side plugs were white and clean, righthand side were more brown one cracked (so need to replace). About a year ago i replaced engine but didnt replace heat shields, because of this, the righthand...

Hi, Thanks for replies. Just before MOT i had RAC man to my car because of flat battery, he told me i wasnt get full charge to battery from alternator and to check connectin on starter motor. At the time i told him that my car had recently started to HUNT a little, and tickover would fall...

Hi, My P38 failed its MOT on some simple items, but the one im not sure how to solve is failure on emissions. I havent any experience of CATs and Lambdas. This is how it was described on sheet (cos high) Exhaust emissions carbon monoxide content after 2nd fast idle excessive. Exhaust...

Hi, Thanks for all the replies, i will trying your suggestions tomorrow, i will let you know how i get on. Cheers Colin