Not sp version of S3 doors. S3 doors bought off pauld on here.

the frames were different left to right The passengers one wouldnt clear the aperture no matter how i adjusted it. drivers one was fine.

I have S3 doors on my 90 ..... these dont look right at all . Mines has the lift up handles but the lock barrel comes through a separate hole in the door. Could this door be designed for a different set of handles/locks ? But my passengers door top from SP didnt fit very well.... no matter...

revisitng this. brakes still great eventual Oil leak underneath not so good..... nearly lost all the oil on the way home on tuesday- it hadnt leaked prior to that - the patch underneath when i parked up looked like the oil filter had come off. it was running off the prop shaft. the Bolts...

Wasn't you moaning about how the brakes should be kept stock as designed last month !

Did mine with britpart recently. Cheap cheerful and managed to look good.

Top drive is suggesting that he would fit a 200tdi But he would not **** about rebuilding it because it's a bit old. What I did was stick the engine in , throw a compression test on it and check the turbo condition. Then run it. And that was a bought off a pallet engine never seen it...

Not sure why you'd rebuild an engine that you know nothing about. But equally I'd not be paying someone to fit an engine that I had no history on. Equally I'd not be paying to have an old engine refurbed All of these things make no financial sense.

https://www.ebay.co.uk/itm/201472329434 That's from my purchased items.

I didn't measure it. I did how ever give it all a wiggle and a prod .... Didn't feel loose in any direction tbh. Definitely oil in the pump though not dry

Aye needs sarcasm tags. Its Its absolutely stotting now. Annoying I scrapped a ****ed 19j year last which had a vac pump bolted to The side.

The 200tdi one off paddocks Nowt fancy. Going strip the original and look for a reason.

Bright bright

New vac pump. Its just a wee bit belting at stopping now. If I get time I'll stick a gauge on it

10 for 1.99 off eBay. Search green 181l t10 led bulbs. Take your pick.

Fitted some green 181l t10 bulbs to the dash instruments. For the first time in 10 years I can see how slow I'm going at night. F

I got an MOT. Tester said brakes are far better than last year. He's talking pish they are ****ing horrendous. He also used the words "she's solid under neeth and everything works" New vac pump getting fitted tomorrow when it gets here.

Push rod adjustment sorted out the pedal feel. Brakes sharp as took. Vac still ****. Even changed hose for some snazzy green vac hose I had in the garage. Engine bay is horrid now. Bit bullet bought a vac pump. See what else it fails on mot tomorrow haha

brakes were **** hot. Prior to low vacuum being noted on my last mot - same tester for years. Then over this year i got pedal creep - the M/C seals had gone - but the bite point was still a good height. Only things that have changed are the Servo , the vac vanes/gaskets and the M/C seals. the...

Also the vac doesn't feel much different. I know I have vac from the pump now with only a 3hg difference between idle and rev. Does anyone know what it should be reading. ? The hose holds vac the one way valve holds and the new servo holds vac.