Over ten years old that's got to be a new record

The base is held to the seat frame with four bolts, you can do away with the rear two and just use the front two so you can remove it when fitted and get to the battery more easily

I normally go on journeys to get away from tools but invariably when I get there I still manage to bump into one or two ;)

I think sprinter vans have similar

Exactly there is no such thing as "just a slab of aluminium" and there in lies the problem

Might aswell just fit wheels with more offset then:p Seen well made and terrible spacers but personally I don't like the idea and not being able to see the nuts that hold them to the hubs.

Here

It's quite easy to mix the trailing and leading shoes up. Have a look at landrover toolbox videos on youtube

Yeah! but you may have trouble shutting the boot with it in, so you better budget for some baler twine to tie it shut. Ps welcome to sarcasticzone

This

o_Oo_O Nice "Safe" working practices going on there! o_O

Was just going to ask the same.

Thought you'd have been a dripping man! ........but didn't mean to get personal ;)

Did you uprate the wiring or just the fuse? If just the fuse I'd seriously check your wiring and put a fire extinguisher in the cab.

Stick your question in the section linked below and you will have more chance of getting the definitive answer https://www.landyzone.co.uk/forum/101s-and-military.79/

That looks so much better than the wibbly pipe sticking out the side vent type (like I've got :( ) What's the visibility like where it runs up the A pillar? Or have you managed to place it behind the pillar in your line of sight?

I bought a similar one but the 20 ton one for about £120 and have had no problems, and with it just being a bottle jack it's easy to swap it out or replace seals, as for the rest it's just very simple metal work so shouldn't cause issues. Only thing I would suggest is get the biggest/most...

£80 delivered off eBay for a 12 ton, don't know if that's outside your price range (you can get a 6ton for a bit les approx £65 )...

Oooh I love it when you talk all dirty like!

Looking good. you say it's 3.5" ID but you know you ain't getting 3.5" through that mesh?