1. freelance

    LATEST NEWS REGARDING "TOMCAT" ALAN

    Sad news, but he is no longer suffering, RIP
  2. freelance

    2.5N/A to 200tdi conversion

    i would have expected to see claret!
  3. freelance

    Clutch Help Needed Plz L Series

    Dipstick tube has been nipped
  4. freelance

    Disco 3 pickup project

    Buy a lhd to start with, but you will struggle to get rid of electrics
  5. freelance

    R380 MANUAL GEARBOX - WATER IN OIL - IS THERE A BREATHER??

    Probably never had an oil change in its life, and built up water content through condensation, you don’t see much water to change oil to mayo
  6. freelance

    Discovery 3 Engine re-build

    You should be able to find a dial gauge and stand in uk for 25-30 quid, and have the crankshaft crack tested !!
  7. freelance

    Help?! Dead in the water??!!!

    How good is your vehicle battery?
  8. freelance

    Discovery 3 Engine re-build

    On a magnetic pillar
  9. freelance

    New Defender Commercial

    A customer has a long wheelbase, he loves it, compares it to disco3/4, he had two disco 5s, but much prefers new defender
  10. freelance

    Starter motor live terminal.

    Danbury auto electrical/ or Chelmsford auto electric in witham will have what you need, probably someone nearer in Basildon will stock them also
  11. freelance

    Starter motor live terminal.

    Any good auto electrician who rebuilds starters/alternators etc should have a kit
  12. freelance

    Range Rover sport park problem

    Have you got dirt, sweat or polish, or something sticky around the edges of the button ?
  13. freelance

    Series 1 - Help to get this started

    Quite likely starter is seized, no shortcuts, you will have to check everything methodically,
  14. freelance

    Photos (how to) I must be stupid I guess .. considering I am a first level supporter

    Thumbnails are more annoying, plenty on here we don’t wish to look at !
  15. freelance

    Sounded like a gush of air?

    Or even just the turbo wastegate operating
  16. freelance

    Linking compressor to gas cylinder

    You’ll still run out of air, because you need a bigger cfm compressor
  17. freelance

    Wind noise from 2023 Range rover

    Time for some duct tape
  18. freelance

    New Land Rover T-Shirt, With A Twist

    typical series, has a bad earth in third photo
  19. freelance

    Freelander 1 1.8 HG continually failing

    What are your liner heights ?
  20. freelance

    Other 1957 88. - Worth looking at??

    Looking at the state of the bottom hinge on the bulkhead, the chassis won’t have escaped the tin worm, the bends over the rear axle, and front bumper mounts need serious attention