Textured paint in a spray can

Ok if anyone finds this post here is a video on how to remove it. All creidt goes to Jasco Kovacevic

Take a look at this test, Also you could look at some of his other videos for help

I saw that a couple of hours ago and I thought the freelander was the better car but the driver was rubbish

2001 TD4 thanks

Anybody got a PDF of the workshop manual?

Also he has a lot of other helpful Freelander videos https://www.youtube.com/playlist?list=PLQVqjk4n1wANtCZaRcYzojUz5YHJD7Z3y

And you didn't even get you name mentioned in the credits? Shocking! :p

Wish I knew this before I spent £300 on a recon :(

I came across this youtuber and thought some of you might be able to use some of his advice https://www.youtube.com/playlist?list=PLQVqjk4n1wANtCZaRcYzojUz5YHJD7Z3y

An easy fix find some old tin, Drill a hole the size of the bolt. Job done

A lot of women do that and I know because I heard them complaining that their cars have only done X miles and they had to have a new clutch fitted. The bottom line was holding the car on a hill at traffic lights on the clutch...

To do any damage to that spline you must not have had it lined up properly and you must have been ramming it in with another car! I always lock the gearbox in 4th when putting an IRD on and grease the IRD shaft so the splines can slip into the gearbox nice and easy (Ooo Matron) Any ways try my...

Hi and welcome, The best thing to do is remove all the remaining prop and VCU from the car if it hasten been already as trying to fit just half a prop is near impossible and it would be quicker to do it on the ground not 2 foot in the air. Once down have a look at the video below. You will need...

I agree with Nodge get somebody to go under it and lever the shields away from the discs a little repeat if it needs it

Getting any codes read or live data is proberly your best bet in tracking down the issue

How did that centre diff mount look? Did you move it about to see if it was ripped?

Just replaced my rear diff with a recon

Do you mean a clutch alignment tool? That's just posh talk for six inches off the end of a broom handle that you have sharpened at one end