1. T

    For all ex military

    Tank Corps? You must be old, they became the Royal Tank Regiment 4thApril 1939. My granddad never forgave them for changing it. He served 1919- 1953 became an RSM in the deserts of North Africa 1942.
  2. T

    What have you done on your 90/110/130 today?

    Found out why the 110 wouldn't start.. the cable from the solenoid to the starter, was loose .. undid nut, cleaned connector reconnected, cleaned the other connections.. started OK.. It's -1C out there but windy so the feels like is -9C.. bathroom heater is on now... Long soak in the bath soon...
  3. T

    2.5na to 200/300 tdi

    No I get 32mph average mpg, that's country and A roads, hitting 60 where I can, not dual carriageways and motorways pushing the flying brick at 70mph ( true mph by gps) Last time I ventured up the A1 I got it down to 27mpg. Being on a disco transfer box it's quite relaxed cruising at a constant...
  4. T

    Fuel Tank lifesplan?

    My 110 rotted out it's tank on top at about 30 years old, but what the previous owners had done with it I don't know.
  5. T

    2.5na to 200/300 tdi

    That's exactly what my 200tdi disco box was running, / now is running as far as wheels are concerned, absolutely no problems on any road or towing.. Ps I added lots of sound proofing to body and bonnet, it's quite quiet..
  6. T

    2.5na to 200/300 tdi

    If you're going for a 200tdi or 300tdi then go for the disco transfer box at the same time, unless your are into serious off-road work. The TDI power plus disco transfer box, makes for much more relaxed open road travelling. My 1984 110 was converted with the parts from a 200tdi disco...
  7. T

    Hallo all from muddy Somerset UK.

    A welcome from Norfolk, that's a nice area and I've been that way many times, as one set of grandparents lived just down the road at Maiden Bradley..
  8. T

    Washer Jet Upgrades

    I fitted a wiper mounted nozzles kit, three on each blade, works well just with the original pump..
  9. T

    Soldering iron or gun

    For confined spaces, IE the landrover I use a butane iron and I've taken to using solder splices on the landy. One of the previous owners was definitely a wiring butcher. In the workshop is a solder station, and an antex 25W. At the model railway club we have a Weller, my old Weller died...
  10. T

    Disco transfer box in defender

    If you do it, it transforms higher speed driving, yes you may have to change down more often. But I've found its worth it.. And you save a lot of fuel unless you really hoof it.
  11. T

    What's in your garage???

    Currently in the double garage are, A workbench, An old ride on lawnmower to be converted into a mini lorry. A keel for my sailing boat, it's awaiting joining the 150kg ballast weight to the fin keel. A generator 3kw, Several rolls of insulation, A toilet awaiting installation. ( the old one...
  12. T

    P38A Nose weight please?

    Noting western slopes comments, I did read elsewhere the USA nose weight recommendations for many vehicles are much heavier than those for europe. Unfortunately the article didn't say why.
  13. T

    Newbie from NI

    Welcome to the site, 60years ago-ish NI was my home for a couple of years.
  14. T

    A Level Survey

    My Land Rover normally has a selection of sailing equipment, PAT testing equipment, occasionally a model railway and sometimes things like a fencing mallet ( 9inch diameter iron bound wooden head), and a dydle.
  15. T

    Hello from Norfolk

    Welcome to the site from someone between the broads and the sea.
  16. T

    Insulating / Soundproffing

    If it doesn't melt it then high temperature impact adhesive.
  17. T

    Respray Dilemma... caledonian blue or other

    That's not Caledonian blue this is, Though I prefer Highland railway green,
  18. T

    Hello from Andover.

    Welcome to the mad house from someone who used to get the number 8 bus to go to Andover..
  19. T

    Speaker System For Landys

    I put lots of lead flashing tape, all over the inside, lined much of that with Eva foam mats. Then clad the inside at the back with wood. It much quieter, warmer, and I don't need to turn up the sound. Behind the driver is a fixed partition keeping the heat in the front. Behind the...
  20. T

    Bull bars legal?

    I've hit deer on two separate occasions , there's deer in the garden today muntjac and dodged 5 reds that ran across the front the landy. I've dodged loose horses, been surrounded by cows or sheep . All within a mile of the house. I'll keep my bull bar,. There was no trouble with insurance...