Wich cluster/part do you mean ? I think it also blew with the bulb out the holder too. Dan

Hoping that would be it, as I do have a leak that appears on the front left headlining when parked in the wrong direction. Unfortunately it appears good as new behind both footwell panels, with no sign of corrosion. I assume the place to check (mine being RH drive) was the drivers side as I saw...

will check in a min

taped up each individual wire & taped them together so theyre not shorting out on each other. It is still blowing the fuse though, also rear number plate bubls have gone so need to replace these, but sould that cause it to blow with both number plate lights gone ?

So, where is next to check the cause of fuse F11 keep popping ? is it connected to my trailer socket wiring as this hasnt been rewired in after having the bumper off whilst protecting the chassis. Dan.

Ok Ill check fuse F11 again, sure it had continuity. Edit it is fuse F11, it has popped it when I switched the side lights on after fitting a fresh 10 amp fuse. dAN.

the rear bulb holder is sealed, but checking the contacts again with bulb removed I got 11.8v, without the engine running. On the front the reading was most likely wrong, as I was trying to juggle the bulb holder and meter, but this time I got my partner to hold the bulb holder so I could check...

Hi Sirraferry its a 04 and its the left side looking from inside the vehicle. Ill check to see if I can get the probes in where the cables enter. It didnt look possible wich is why I took the bulbs out. Dan.

Hi my sidelights stopped working on the way to mot on nearside. It`s a discovery 2 td5. Ive replaced the fuses F10 OR 11 & checked the bulb holders for power (got 21v on front sidelight & just under 12 for the rear if that sounds right) & the bulbd work ok when putting power to them off a spare...

Ah that would be great, I`m in rush so that would be superb. Hopefully be a bit warmer too. If you message me where/when you want to meet up nearer the time I`ll come to collect Dan.

Where is collection from please ? I'm not far from Cambridge & would like it please. Dan

Did you go through some water at all ? and if so did you remove the drain plug at the bottom after to let any of the crap out ? Dan

Could well be the release bearing that's noisy. I had the same symptoms as you with the box & it got worse & became really hard to select gears. I bit the bullet & replaced everything when I got a recon box off the bay. I changed the DMF for a standard Valeo, as well as the clutch. I also got...

Try looking under the "common faults and questions sections" there is a good write up there about tyre sizes wich may help. And welcome to the forum by the way. Dan.

That`s what I did. Can`t recall the company name, but when I lost my main key I found out the spare unlocked the door but didn't do the ignition. I got the barrel changed by a locksmith (yes I know it`s easy but ins company needed proof for my keycare cover) & bought 2 blank keys, with 2...

Do you have the air canister/pipes from the right of compressor that go to the rear air bags. I melted mine whilst welding as the heat went through the fire blanket. Ive patched them up for the moment with new vacum hose over the top but could do with replacing them. Dan.

Keep the good work up meego. I`m still doing bits to my disco 2 as & when I get time. I quite like looking at these threads. This weekend I`ll be welding the mounting up that the nearside rear sidestep attaches too. Luckily for me that is the only bit that needs welding that I have found. I even...

Can`t really recall having much trouble with it tbh. I think I just loosely put both bolts in & had someone hold the bracket down with a bar whilst I tightened them down, but I may be talking bollocks as it was quite a few years ago. I`m sure I started with the seats and then worked my way up...

I can possibly take pics later if needed. The seats in a disco 2 are forward facing. The holes needed to install the seats are all there from factory behind black foam stuck on, but you will need to tap the holes with a 7/8th tap If I remember correctly when I installed mine. Dan.

good shout too Johnlad as the fuel pressure regulator is above & slightly forward of the crank sensor so may of spilt diesel down there.