Yea - there's some set up where you text like what numbers can control it, set the pin etc. From giffgaff's side, you get free calls & texts to other giffgaff users for 3 months when you buy a goodybag or top up - so i got 3 months free when i topped it up, and when I get to the end of three...

Though if the relay did come in a blue bag, i'd asked for a replacement bearmach one from paddocks - they advertise it as being bearmach, so if you didn't get that, complain

Did all the replacement parts come in a blue box?

I've fitted a TK103B to my landy. So far it seems to work well, and hasn't drained my battery despite it sitting in the back garden. I hooked it up to orange.gps-trace.com. It gives me a map, and I've set any location reports to go there as well as a text message. I'm currently using giffgaff -...

Will it? I had a look there and no brown/red trace

Yea...that's what the colour suggests - the only brown wire i've seen with eyes is the one that goes to the battery..... Unless there's one at the back of the starter? I'm pretty sure there isn't - I think it was just the big thick red wire plus a thin white wire from the ignition

The only wires I had in the engine bay that had eyes were some grounds and also the wire for the glow plugs. I can check when I get home, but I don't remember any "live" wires with eyes. I've almost finished rebuilding my 200tdi - am just finishing off last bits of wiring in the dash and...

There's also two.bolts onto at the end of the column onto a bracket on the footwell

I had exactly the same on my 200.

When you replaced the fuel filter, did you fill the new one up before fitting? If not, did you open the bleed valve on top of filter housing and pump the lift pump until fuel appeared at the bleed valve? My guess is the answer will be no to more than one of those questions.

Brilliant! Thanks :)

Hello, I'm finishing on the electrics on my landy, and need to connect into some ignition live feeds near the ignition. I had originally a multiway spade adapter - it had a male and female bit, so the female went onto the ignition spade, and then the wire that was there originally went onto...

Your clump of wires near cigarette lighter seems fine. Mine has exactly the same

What? Grease doesn't work on brakes because you don't want grease or oil anywhere near your brakes!

And indeed there's a label on the switch, that could well say "battery charger"

hold it as it would bolt down (ie the base flat), and it should unravel. It's the inertia that locks the seat belt, so if it's tipped a different way it can lock.

In the past I've just bought the parts separately to get timkin bearings. Not that much to buy, though there may well be some sellers that have lots Otherwise you can try putting g on the end of the kit code... Again....not tried that

No...push button doors. Looks very similar, I don't know how much the doors have changed between 1992 and 2012....i know they're now all steel rather than just steel frames, but wondered if they're the same shape. It looks like the foam could offer some sound insulation as well, which would be...

Interesting. I wonder what the chances of those water shedder things fitting a 1992 model are.....

You can undo the two screws holding the dash on and pull the trim out (there's plenty more holding dash on, so it won't fall off ;) )