thanks Treworgey 90, had read your thread where you fitted your set all springs marked what side forward and rear so thats no problem just when i set everything out on the garage floor i noticed the front springs where a different height:drama: :drama: :drama: so if this normal then ok:D :D...

just received my terrafirma 2" medium lift kit, however when i placed the rear springs beside the front springs they are a different height:confused: :confused: :confused: is this normal:confused: :confused: :confused: checked the terrafirma web site and i have the correct part numbers on...

Help will a 1994 90 200dti defender chassis fit on my 1996 90 300tdi:confused: :confused: i have been told i might have to move the engine mounts on the 200tdi chassis:eek: :eek: or would i be able just to use 200tdi mounts fitted to my 300tdi engine:D :D many thanks

odenne thanks for the reply, landy people are all on a budget:mad: :mad: but have read alot about these ARB air lockers so i think i wil try a set on the rear diff:) :) :) well after xmas is over..................cheers

Hello what are the best air lockers to buy for my 90? and do i need a set on both diffs? cheers:) :)

Big Bad Wolf many thanks:) :)

big bad wolf i have this for my 1989 landy 90td, is these the same parts for a 1996 Defender 300tdi that i am about to buy:confused: :confused: Treworgey 90 do you have a web site that i could down load this info from, 15mb will be to big to email many thanks:) :)

hello as it says, does anyone know where i can down load a copy:confused: :confused: many thanks:D :D :D

"erm 50mm aint 2" either. 25.4 x 2 = 50.8mm" ffs the guy is only asking:eek: :eek: :eek: , all the landy mags state 50mm................cut the guy a bit of slack:p :p hows he going to learn unless he asks:confused: :confused: :confused: :confused: i have fitted a set of terrafirma medium...

hand painted my landy 90 with coach paint, 2ltrs will be plenty:D :D

hello finally got my disco on the diagnostic computer, the only fault that showed was one of the injectors was faulty :mad: :mad: its the one with a sensor fitted part number ERR3337E, its on a 1996 disco es 300tdi auto, does anyone have a good second hand one for sale? OR can this injector...

Treworgey 90 many thanks for the quick reply, this the drawing i used to wire up my split charge system and my winch HOWEVER i didn't buy there X charge relay which was a bit mistake, i bought a cheap 100amp one from eblager which was not continious rated that will all change as i have...

Hi my self built split charger system has packed in over the weekend while winching:mad: :mad: i think i have traced the fault to a burnt out relay which i believe was to small only 100amps what size of relay would i require? and where would i buy one? also does anyone have a simple split...

The Mad Hat Man, its not that i dont like your answer it that i found the tie bar and track rod bar where damaged while off roading, i have a new tie bar and track rod bar, what i am worried about is these will now not fit when i remove the 90 axle and fit the disco 200tdi axle, if you can see...

please anybody any idea:confused: :confused:

Hello me thinks i have fooked up:mad: if i fit the disco 200tdi axle into my landy 90 will all the 90 steering rods and steering damper fit :eek: :eek: me confused so go easy:confused: :confused: becks

hello finally got round to taking the axle out of the disco and i hope to get it fitted into my 90 tomorrow, it looks straight forward, however on the disco brakes there are two brake pipes:eek: :eek: and on the 90 a single brake pipe:eek: :eek: , how do i get round this:confused: :confused...

Hi will the TD accelerator cable fit when in i install a disco 200tdi engine into my landy 90:confused: :confused: :confused: :confused:

Griffdowg stupid really was thinking HD would be better, now reading various forums this is not the case:confused: :confused: at the minute the springs etc on my 90 leave her sitting nice, i will now wait until i fit the heavier 200tdi engine and see how she looks:) :)

Griffdowg thanks i will have a look at this site, i have just fitted a new winch and bumper, and i will fit the 200tdi engine some time in the next two weeks, so i just want to make sure the old girl doesnt sag