@Gingerbread Have you checked the other areas mentioned! If you have? Good or Bad!! As for that 'Weep Hole'! No, leave it alone, unless you have changed the metalwork around the Arch/Bulkhead! Kev

Hi @podshole you might want to pop over to 'Introduce Yourself' first! There is a wealth of knowledge on here, let us know what your Driving, where you are? Post your problem (we can see it) get the help! And let us know if it has helped! Kevin Td5 driver🤪

As @Stanleysteamer said! Check the area between the arch and bulkhead? On both sides, you will need to move away the dampener to view the area?? As for panels? Have a look at eBay? As there are some on there for numerous prices 🤔 Also we have both just done welding around those areas. Kev

I did not about 6 months ago! So now I'm learning a now skill, I'm hoping to keep my Td5 on the road for as long as possible 😊 Hope you get sorted? Kev

You have a couple of members on LZ on here, who are Kent based?? 1 just outside Faversham @oiley, 1 in Canterbury @Langers and 1 just out Dover @gregsargent Not sure if they are still active?? Or as mentioned above!! Mobile welder?? Or get yourself one, if you don't have one yourself! (Price...

Where abouts??

Copy and paste your post, and send to this site!! https://www.disco5forums.co.uk/ You, hopefully get a quicker response!! Sorry you got no assistance on Landyzone🤔 Hope you find out the issue. All the best Kev

Did you fab the sill? Kev

Same area as mine🙄 But I had both sides😫 and both wings! Same garage for the MoT! So surprised it was not picked up the year before?? Kev

And the post does not show the end result 🙄 But I'm on the road now when it passed MoT with 2 advisories, none being what we had done! (one being done when left the garage) Kev

And the post does not show the end result 🙄 But I'm on the road now when it passed MoT with 2 advisories, none being what we had done! Kev

I had mine done beginning of the year! Both wings and bulkhead. Garage done the welding! I done the fabrication 👍 This is not all the picks! (Site does not take all) Kev

Welcome back, Firstly, take it for an MoT (Fresh set of eyes!! Even if it has one now! That will give you a basics of where to work?) As above! Source Nanacome! Or borrow one for a couple of days. I also have ICarsoft for mine! Good for quick reads! Checks: MaF? Waste Gate (just had to do...

I have an icarsoft i930 for my Td4 and Td5, it has not given me any problems reading what's going on with both cars yet! But, if I need an in depth over view? I will pop round to my friends garage? (But not needed to as yet). Kev

So! Now we are not going to have a clue as to which LR we are looking at? As they all look the bloody same! I.e. Range Rover (all new models), Discovery 5 (both models) 🤔🤔🤔🤔😞

It's a V8! Unless he has changed it! Kev

Looks like you will need to clean and dry that area! Drive fir a few miles and check again?? Kev

No GLUE!! Use Tiger Seal!! Kev

Sounds like you may need to remove the rear door card!! Should take no more than a hour! I will also give you a chance to check all the other bits?? Kev

FL2 prices from: 900-21000? Once you get some pics! Try selling on Landyzone! Possible more pennies than scraping it? Kev