@adicutza2007 , I'd really recommend you test drive a Subaru Forester XT before you buy an Evoque. They're lightyears better...more internal space, far more robust, rarely fail, significantly lower running cost, insurance is remarkably low, are rarely if at all stolen and above all...you 1. have...

This is not such a grey area. There are very few differences between the 2.5na chassis and the 300tdi chassis, the main difference being the engine mountings. In both cases the original chassis number will need to be transferred to the new chassis. There have been 100's of LR owners who have...

@adyw , you may like to buy an A frame ball joint that has a built in grease nipple. Again, Gwyn Lewis has them readily available.

@KISSMYAURA , are you saying you don't like Terrafookwits? ;)

A timely video

As @lynall , or you'll need to buy a wide angle HD UJ prop. You might like to call and discuss HD props with Gwyn Lewis. He has these readily available on his website.

Try draining the oil first.

Have you not a workshop manual? Suggest start with the basics first.

Logically as @Dippypud suggests above. Also, could there be a FB page for the Geog. Dept., U of Reading/Thames Valley University?

For complete ready to go f&r axles +gearbox/txfr box +engine front cover see here https://gwynlewis4x4.co.uk/product-category/wading-kits-fittings/

Not sure why you're struggling on this. Do you understand automotive electrics? This is very straight forward, if no 12v to switch input it's either 1. No 12v to fuse, 2. The fuse, 3. The power cable from fuse to switch. Have you tested for 12v between fuse and 12v cable to switch with the...

@Windy scotland , no idea as to why there's such a big difference in price but it'd be worth cross referencing seat belt types and the different mounting points between model years...they're not all the same. https://www.lrworkshop.com/diagrams/land-rover-defender-seats/seat-belts

@dag019 , thank you...I misread the OP's post. Of course, OP could update to a std Tdi exhaust, manifold to tailpipe if his wallet permits ;)

You're needing part #3 in the diagram https://www.lrworkshop.com/diagrams/land-rover-defender-exhaust-systems/exhaust-diesel/rear_53423

We have near identical set up. Here's mine, a 1987 200Tdi with LT77 and 200Tdi exhaust system. The first bracket is located same as yours [see top left of photo']. The bracket/location is correct and are readily available.

Mikalor hose clamps?

Drove to Greys Court, Rotherfield Greys, for a Landy picnic and a real good tour of the house and the splendid gardens and grounds...and even under near constant drizzle, Greys Court is a fascinating place. It was our very first visit despite living only 45mins away for over thirty years...

Possibly not, the thread's four years old !

+2 for Paintman Panels https://www.paintmanpanels.co.uk/ And buy your enamel paint for the door from Paintman Paints https://paintman.co.uk/product-category/coach-enamel-paint/cars-and-classics/land-rover-colours/

How long did that lot take to write?