was it a galv heater box also?

i just drill a hole in the roof and just use a ton of sealant

Do you have any pictures to describe your issue?

It’s a 6 month old new “defender”

Heater box, this was the old one!

(also note that if it's a 1990 defender doesn't mean 1990 parts will fit, over the years people will change parts from discoveries etc into defenders so just keep that in mind for future parts on your vehicle)

not bad price, SP is pretty good, they're easy to fit, just undo all the pipes + steering rack, then there's 4 bolts from the chassis side you undo, depending which defender you have the drop down elbow.. just buy a new one they're a pain to pull off

those lower bushes are a nightmare.. and i've seen people cut them off and just put a new one ontop of the old one..

Morning all.. post came early today..

SP4X4

Grenadier over the "Defender" any day of the week.

So just got some new galv doors.. However.. if you have never put the locks together.. there's no good diagrams and you pretty much have to work it out for yourself.. so here's some images of how it goes together.. after watching videos and zooming in on the lock mechanism.. (this is drivers door)

Is there any major differences between the whole heater box unit in the 300tdi vs td5? other than the obvious heater matrix option is straight out vs 90 degree?

One thing to look out for is the big spider that made all those cobwebs

Exactly.. they ain't doing it for fun are they..

Just hide the key, the new OTA update from Land Rover to prevent the key signals is an improvement, but just put your key in a bag that blocks the signal.

just buy a mixed set off amazon, should do the trick

So currently I've got a Steve parkers kit install (pipes etc).. However the question is about the steering pump lines.. because the engine sits a few inches back what do i need to do here to sort these lines out? Just a normal 300tdi set of lines for a defender or what?

and it's the cheapest option

I just installed bucket seats.. I blocked out my battery access now.. but in the event of me getting to it again it's just 4 bolts.. I installed anderson plugs in the event i need to jump start the battery + added a trickle charger lead. You can install the seat leg room extenders which give...