Heat is a result of Current Flow through Resistance. Therefore you could have one of two problems either too high a current flow or a high resistance joint. You say it melted the connection point on the last switch was any damage done to the connector on the wiring loom? is so this would...

They are for the Heater pads in the Seat

Could try AL Services which are on willis way down by Sunseeker on the Fleetsbridge Ind Est, the slip road by Lok'n'store behind B&Q, their phone number is 01202 668666. They sell patented parts a lot cheaper than LR.

Paul "Is there not anyway of redirecting the power for the relay away from the uax on the ignition and rerouting it in the conventional way" 1) You could change the LR loom and connect onto the back of the alternator as in the old days, I looked at doing this but due to size of hands can't...

The full Instructions for this kit are on the RAVE CD, no soldering required as plugs into existing connectors in fuse board, behind O/S rear light & battery. One word of caution though, LR in their wisdom have powered the relays from the Aux feed on the fuse board this means that the Batt /...

Have a 2000 DiscoveryII TD5 GS with Cloth seats The other day the wife turned on her heated seat which up to that point has been working fine, however this time it decided to burn a hole in the seat and then the wifes bottom!! Anyone else had or heard of a problem like this, have spoken to...

Just had the same problem on mine, basically the SLS pump had gone. Would drive along and sometimes after about 5-10 Mins the light would come on (This fault shows that a request has been made to lift the vehicle but the vehicle has not lifted). Switcing off and then restarting seems to...