I’ve stripped my heated seat for the d1 and have found that the thermistor (I think it’s called this?!) may be dud. I think this as I get get continuity through the heated seat element (and it heats when connected to a battery) but I don’t get any continuity through this component, the d1 heated...

https://www.ebay.co.uk/itm/266926910980?itmmeta=01J3ZQJV5BS289VH0M90KDQHHZ&hash=item3e26156e04:g:voEAAOSw0ttmp7EL This gives you a bit of an idea. Bare in mind early ones are more sought after

Thanks!!! I’ll get it drawn up!

I thought you had to almost build your own setup but this madman setup that D1nut linked looks the absolute bollocks. This is a kit here with everything in the box to do what you want and more! @D1Nut - you just cost me more money!!! 😂 https://shopglobal.madmandevelopments.com/products/lr300

The Aussies swear by this mad man jobbie - didn’t realise you could get in uk - thanks for link 👍🏻 Your new head was prob amc from turners then. I’ve just bought another commercial with 270k on, my 5 door had 240 but is getting a fresh build but even at 240 the big ends showed little wear!!

How many miles?! Prove it! 😂 Is it on the same head? This post is bang on money OP. What kills them is heat. Egt gauge is piece of p!ss. You can make the water level alarm with a Range Rover cap but can also buy a kit on eBay including this that’s plug and play! Can’t remember what it’s called...

But then you have to wake up and go out to your crv in the morning and live with the fact that you could have been driving a 90s icon but you opted for bland 😂

D1 mate!

Holds fuse box and coolant reservoir. I might try and remake with bender

Looking good mate! I’ve a challenge for you if you fancy it??!! I can give you all dims, just name the price! Me brwckets dead

https://mylandrover.rocks/going-back-in-time-removing-300tdi-edc/ This is the site. And if you haven’t got them check sierafery posts and download the rave manual and rave electrical manual: https://www.landyzone.co.uk/land-rover/300tdi-manual-d1-1997-rave.384805/

Clutch slave cylinder (which I obviously don’t have) looking at pictures of autos I can’t see the hole. I’ll just wait until I’ve got the other one, put together what I know and go from there 😂👍🏻

I spent most of my twenties working away and had very little time so know that feeling!

I haven’t no but I’m going to upgrade to a parweld at some point and the one I was looking at actually doubled up as tig. I’m going to see what the welding shop can do for me when I’m out of gas. I’d like to learn tig anyway. Yes a lot of the RRC stuff transfers over but you got the skins to...

It’s gotta he hasn’t it!! Good shout!!

Im not entirely sure yet. I’m going to use it as a van for a bit but it won’t be a donor. I’d like to keep going with d1s. Maybe repair and sell a couple, break the rotten ones. See how we go! I also need to tick an RRC off

Looks like a tube is going in there on one of my pictures. It will be so much easier after next week as I’ll have another disco for reference

steering column is in. What a bastard. The lower hole here is screen wash to the rear. Any idea what top one is?! Right next to brake booster

Thank you! They are but wiring is quite different. Does confirm where that fork sits though. Look how clean your wings are!!!

Wash your mouth out with the Honda crv 😂. I’m looking to do similar to be honest to one of similar mileage. I’m restoring one at the moment but have got a commercial to take the beating of shifting stuff about and general duties instead of my daily getting abused. Lots of people on here have...