I think I am going to go stick with the Epsom Green and give it another couple of good close coats and see how it goes.

See what I mean....? Door looks lighter than the rear quarter panel. Here's the whole kaboodle

So, I was told that my '99 110 colour was 'Epsom Green'...hmmm, after three coats and a couple of coats of lacquer it just doesn't look right (a bit light than the rest of the panels) - either it needs a few more coats or the colour isn't right. There's nothing on the vehicle that helps, VIN...

Yeah, all good in that respect. Recent oil/filters change.

Thanks everyone - I am going to change the injector washers and seals next - I was curious re the prime cycle as sometimes it starts first time (engine turning about 5 or 6 times) others it struggles to start. It does sound like there is air in there though, as it sounds like its sucking the...

No not the Amazon version :) How long should it take for the system to prime the fuel when turning on the ignition? Mine takes a goo20 seconds - starts with a low-pitched noise then increases to high-pitched for a couple of seconds before stopping. I am sure I may have to replace injector...

What are they actually called?

Ah, good plan! 🤘

@Anaconda - I did something similar, but with the whole cover!!! Bloody useless thing....tempted to leave the one that covers the turbo/Wastegate off too.

Bolt holding the cover on above the cooler had decided to be a major PITA, must have nudged the hose when, erm, easing it out 🙄

Anyone managed to tidy this up?

Hi, The fuel inlet hose came loose off on my Defender TD5 and as a result I left a Hansel and Gretel like trail of fuel behind me until I noticed it - there was just enough to keep the engine running until I got back. I pushed it back in and have secured the hose at both ends with cable ties...

Thanks ...

Quick question....are the acoustic covers for the engine the same dimensions for Discovery'and Defender TD5's? Ta!

Anyone used the Twinwoods Td5 Injector Puller / Removal Tool? Half the price of the Laser one and seems to do the job - I am not keen on using an Allen Key or butchered pliers....I think they need to be extracted properly rather than on an angle. Td5 Injector Puller / Removal Tool Cheers!

I am getting odd readings from the Nanocom, one log will give an expected readout for the cylinders for example, the next time it will only read from one. The EGR is blanked off so why would I get a reading from the EGR Modulator and also from the Wastegate Modulator - I thought it was only the...

Looks nice, but how would you get to the back of the dash if needed?

Count me in too!!! :vb-drink:

Hi, I assume the 'click' comes from the relay? I have a couple of 'beepers' but they are either too loud, or after taping them up they are too low - I only really installed them so I could hear the alarm arm. I would be content with the hazards flashing now - however, I would like to have some...

I have an Autel Maxi AP200 that's just stopped working. It's was handy as a little dashboard on my phone without needing to plug the Nanocom in. Can you recommend one that will would work in my '99 110? FWIW the Ap200 worked great in the Disco 2 (2001) ...it's just not working in either of my...