EP90 isnt as simple as fill it with EP90. Ideally any previous grease has to be cleaned off/drained. Got to be 100% certain that your swivel balls are in excellent condition, swivels seals excellent condition, flanges need RTV. Can also remove the inner seal on the stub axle to allow EP90 to...

One shot is the grease to use... even comes in a handy container to pour it straight in

Eventful drive home! Car went a bit "squiffy" pulled over did the normal checks. Even jacked it up and checked wheel bearings etc.. Zero play. Couldnt see anything at all.... So I thought id drive back to the yard for good measure. Drove through the gates and the wheel bearing collapsed! So...

Cheers :) PM sent.

Been chasing down my random mislock issue since i fitted the cage. First thought i must have nicked a cable somewhere... Nope, turns out just plugged the side repeater into the horn 😅 Just swapping that side repeater has solved all the isssues! Id even bought copper bolts to increase...

Driven around a fair bit now. Got a very annoying plastic rattle from the front, seems incidental. Mislock, easily solved probably nicked or dislodged a door switch 110 certainly feels more rigid, I can feel less flex in the body/chassis when cornering. Theres a touch more body roll than...

Cleaned up and left as bare stainless on another 110!

They look good nicely painted! The trike looks justbas awesome!

Cheers guys 😁 Will gets some more pics when its cleaned again!

Day 3 of cage fitting! Called in some help as the rear end internal section and finall assembly is pretty much impossible alone. Finished 6 hours quicker than last time! I suspect with 2 people the whole time I could do this in 2 days easy! Incredibly pleased and very happy. Looks...

Was about to say! Also did some soundproofing on the roof as the liners where down and resealed the sunroof 😅 After the interior went back in I noticed a couple negatives and a couple positives. So because I have Corbeaus which move the driving position 50mm toward the door it means the top of...

Another long day! But productive! Front end is totally back together. B Hoop is and fastened, headliner trimmed and refitted I always knew the sunroof was going to be an issue and I would probably loose the use of it due to this bar - However! After stripping the headliner ive managed to...

Well the time has finally come to fit the cage! This time will be less detailed that before, if anyone wants more indepth click the link my my signature. As before started with the front and working back. Lord how I hate splitting these wings! Drivers side is a doddle, easy access...

Cheers! Very happy with how they turned out. Very well so far. Nice and bright, havnt had them fog up yet. Quality seems good and recently passed an MOT. Heres a link - https://a.aliexpress.com/_EzsXd75

Thank you! Thats what im trying to do, just better, cleaner with a few upgrades. 😁 Fitted the front and side lightguards I fabricated a couple weeks ago. Im very happy with the outcome If I did make them again I would make a couple tweaks but nothing major. Roll cage next week! Thatll...

100% just not worth it.

Mine was so seized in place I had to use a trolley jack pushing a crobar to dislodge the a frame from the axle. Bolts on the arm to the A frame would not come undone even with heat + 1500nm buzz gun. So grinder. Get new bolts The 3 into the chassis all sheared. New bolts. My first a frame the...

First time since I bought it. A proper clean! Underneath, inside and outside. Took ALL DAY 🤣 got quite alot of the scratches out. Quick polish too Exhaust pic 😀

Or grease will do. All youre trying to do is keep the temp down!

Thats fairly decent for an auto! Often seem them in the mid to high teens. My 110 around town returns abour 20 - 24mpg, heavily tuned but mway driving 28 - 32