😫😫😫 Got the health check back from Gigglepin... The issue i have with the clutch is likely down to the clutch itself or something within the bellhousing. Its barely drivable as it is and I don't want to risk it completely letting go leaving me stranded. So made the very painful choice to...

I did! I was in Wales off roading 🤣 Yeah ill take dads RR and do a few runs!

Parents have sold their house and with it my garage/workshop goes as well 😔 Alas im moving soon and a garage to build! Hopefully the 110 behaves itself and stays together till its done 😂 I now have to dispose of 220L of waste oil 🤣 6 years of car servicing here!

Took some time today to strip the master and slave off. I always forget how easy it is to remove the pedal box.... Found a couple issues Washer on the master is slightly deformed but its very minor The nyloc on the master was also touching the pedal box which doesnt seem right to me...

Thought id fixed the clutch issues but no. Test drive friday no problems at all. Drove home last night absolutely spot on, best its ever been. Drove to work today only just got to work, its at the point now if its in gear with the pedal down it moves on its own! Ordered a new master slave...

Dropped to £150

Not my usual thing to sell but the 86 is becoming a bit small for us so sadly has to go! Will knock £250 off for forum members! Any questions please ask. 2012 GT86 FSH 87km Fresh 12 month MOT - no advisories Avo Stage 2 Turbo Mapped by Fensport ITG Foam Filter (stock included) Cobra Cat...

Ahh ok, ill check that. Did the disco drop arm conversation, tightened to correct torque, driven for 3 weeks and retorqued. It could be ill check again.

All Superpro. All less than a year old.

Right so. Fresh head. Fresh day. Nipped up every nut/union on the clutch. Bled another 500ml through. No change. Adjusted the pedal so the nyloc is only about half on (now secured with loctite). Success! Easy gear changes and i can drive. Seems bizzar that for what ever reason I need that...

Very unlikely being a td5 and give the fork was brand new when the clutch was done. And the the pushrod is still attached to the fork. So it can only be air or yet anothdr failed slave and master. So much so im strongly considering a 6hp/8hp

For the first time the 110 has angered me beyond belief. Monday, started to get a bit difficult to change gears, bit notchy. I thought maybe the pedals lost some adjustment or needs a bit of a bleed. By the time I got home I was having to turn the engine off, select a gear, engine back on to...

Id like.to see!

Kent & West Sussex. £600 labour is my average over 4 LR clutch labour prices, not something I normally do myself. Just not worth it imo without ramps. Your looking £500 ish for a clutch and DMF. Budget 1200 but ive never paid more than 1k

Yeah not enjoyable! I only caught fire twice, car one once 😅 Just cant believe how thin the metal got over such a short period! I even considered pulling out the Tig!

Today got very stressful. What started out as a fairly small hole with a plan, got bigger and bigger. Even heavy taps with a pointed hammer didnt reveal much. However as soon as the welder touched it was like a lighter on a rizzla... hence the multiple patches. The hole got bigger... Also...

It was one piece, laser cut, press braked and some manual bending with tabs. Brackets and gussets welded in afterwards. Fits to the car like everyone elses, one fixing on the bulkhead bolt. Couple on the outriger. I see what youre thinking and I quite like that idea and I have thought about...

£600 labour in the South.

Dont know tbf, certainly wont be doing myself at this stage without more space. Not fond of a 6K bill either.... So not for now.

It is very handy having a selection of forklifts 😅 Will make the repairs easier for sure.