Gaz13

New Member
The clutch on my 05 TD5 Defender has gone. I’ve been quoted, on a worse case scenario of needing slave and master cylinders, a price of £1600. Is this really what they cost to supply and fit?
 
Considering the time it takes to remove the gearbox and refit with new clutch I think the price is not unreasonable at all.
 
Does that include a new DMF?

Valeo dmf and clutch kit 750 quid ebay, slave and master will be less than a ton, trade prices most likely less.
I would hazard a guess less than a days work for a tech who knows what they are doing.
 
It’s a real worst case scenario, if it needs everything, including a new dmf. I’m guessing it would probably be a few hundred quid less if it doesn’t need the slave and master cylinders.
 
I don't see how a master cylinder has any relevance.
My son was getting quoted about £1K for a 200tdi and clutch kit is considerably cheaper.
 
If the car is reatively rust/mud/crud free then taking the transfer box and gearbox off takes a few hours.
They may be able to slide it back ??
Clutch is relatively easy/quick to remove/refit at this point.
If a new flywheel is needed another 1/2 hour for that.
Starting @ 08:30 it should be at this stage by 12:30

If things don't need cleaning up prior to reassembly then it should all be back together by 14:30 and the inside, floors, covers, carpets etc back in by 4pm.

8 hours @ £60/hr + vat = £576
Probably £900 to £1000 at a main stealer, maybe more.

£800 for bits (non JLR, ie Valeo etc) - you could get blue box stuff from the likes of Craddocks/JGS4X4 etc and save a £150 ?
You could go for a Single Mass flywheel and clutch (avoid LOF) and save £2/300 in parts....
(Note: I wouldn't reccommend it though)

New bolts/odds-n-sods £25
G/T Box Oils (may as well) £65

£1200 to £1800 at a guess.
Single Mass £875 to £1400

All estimates.
No I don't want to do it for you.
Good luck.
 
How far south?

Kent & West Sussex.

£600 labour is my average over 4 LR clutch labour prices, not something I normally do myself. Just not worth it imo without ramps.

Your looking £500 ish for a clutch and DMF.

Budget 1200 but ive never paid more than 1k
 
So I’ve booked it in for tomorrow and will update when I get the final invoice. I also asked at another local Land Rover specialist, who had just done a clutch with all the added ancillaries. They had charged £1800.
 
I don't think clutches are particularly cheap on most modern cars are they?
Although saying that I paid to have a clutch on my Focus earlier in the year and it was just over £500.
If I need a clutch done on my TD5 I will just have to cry as I don't really have anywhere to do it.
 
I don't think clutches are particularly cheap on most modern cars are they?
Although saying that I paid to have a clutch on my Focus earlier in the year and it was just over £500.
If I need a clutch done on my TD5 I will just have to cry as I don't really have anywhere to do it.

I have done series and 90 clutches on my driveway, last d2 I did I used the works 2 poster, am sure it is possible on the driveway if you are keen enough.
 
image.jpg

Picked it up today and the clutch feels so much lighter. Painful, yes but it should be good for many years.
 

Similar threads