1. brianp38dse

    Air.Susp.Inactive message on 2005 L322

    Nice one, hopefully it will help someone else in the future :)
  2. brianp38dse

    I Must Be Mad...

    Hello and welcome :)
  3. brianp38dse

    Hi. New 1996 Defender 90 owner

    Hello and welcome :)
  4. brianp38dse

    New Member With A Disco 2

    Hello and welcome :)
  5. brianp38dse

    Hello All - Got a Land Rover.

    Hello and welcome :) Very nice landy there
  6. brianp38dse

    2016 Evoque electronic issues NW London

    Hello and welcome :)
  7. brianp38dse

    Hello

    Welcome back to the mad house :vb-biggrin: :)
  8. brianp38dse

    trans fail safe prog

    Hello and welcome :) often caused by low voltage from duff battery
  9. brianp38dse

    2000 Freelander 2.0 di

    Hello and welcome to LZ :)
  10. brianp38dse

    Rainers Series 3 from Bremen

    Hello and welcome love the pics :)
  11. brianp38dse

    Series 2 won’t start!! Help!

    Hello and welcome :)
  12. brianp38dse

    P38A Aftermarket remote p38

    The battery drain is probably the rf receiver looking for a signal from the remote key if you fix the original ones so the system works you can then fit a second remote switch between the rf receiver and the becm that will stop all signals getting to the becm and waking the system up cost about...
  13. brianp38dse

    Freelander 1 TD4 non start... No pulse to injectors!

    Hello and welcome to LZ :)
  14. brianp38dse

    Hi from Peru!

    Hello and welcome :)
  15. brianp38dse

    Welcome to all member

    Hello and welcome :)
  16. brianp38dse

    Discovery

    Hello and welcome :)
  17. brianp38dse

    Freelander 2 TD4 2009

    Hello and welcome :) Best to ask over in the frelander section of the forum https://www.landyzone.co.uk/forum/land-rover-freelander.9/
  18. brianp38dse

    Hello there

    Hello and welcome to LZ :)
  19. brianp38dse

    I would just like to say

    If its just a crack on the drop edge i would leave it be, who ever buys it may well rip it all out anyway, cheaper just to knock a few hundred quid of the asking price, i have swapped out baths from under the tiles but it is a pig of a job if the bath is within three walls and tiled round the...
  20. brianp38dse

    I would just like to say

    With baths they are the hardest part to change in a bath room so dont skimp on one, a good make is Carron baths they are almost as sturdy as the old cast iron , cheap baths need extra frame work to stop them creaking and moving which leads to the seal going and then leaking and they are made in...