1. Bdwarb1

    Help engine still runs after I take key out of ignition

    Hi I understand- but it’s not the first likely concern with his or my issue - for example my defender has been serviced and has no other issues - the engine is settled. I press my break the engine stops and the key does not stop it. It’s not an issue of my engine burning it’s own fuel etc.....it...
  2. Bdwarb1

    Help engine still runs after I take key out of ignition

    Hi been in for a service, had it on a code reader and had the ignition switch changed. It’s back in Thursday for the drive belt and I’ll mention the ignition problem again. I had some advice that it was a wiring issue. It’s jusy annoying - the engine is running fine and not increasing revs or...
  3. Bdwarb1

    Help engine still runs after I take key out of ignition

    I’ll update ya - same if you find something drop me message
  4. Bdwarb1

    Help engine still runs after I take key out of ignition

    The only thing I have changed are the lights - all around and a new switch that came with the lights. The old switch was for a trailer also (indicator would flash and the trailer light would come on)...thought it might be related....might swop over again.
  5. Bdwarb1

    Help engine still runs after I take key out of ignition

    2.4 puma. Any help is great! Thanks
  6. Bdwarb1

    Help engine still runs after I take key out of ignition

    Cheers sounds sensible What are You thoughts about the runaway comments?
  7. Bdwarb1

    Help engine still runs after I take key out of ignition

    My defender has done 67000. It seems a common problem but it’s different wiring issues. Some scary comments on here! I am driving still. A runaway does not need the ignition and it’s not about the electrics but other problems.....also rare! It’s easy to scare.
  8. Bdwarb1

    Help engine still runs after I take key out of ignition

    Hi Let me know what he says....I had mine in and the garage changed the ignition switch. Did it again today! I’m going back anyway as I’m having a problem with the drive belt. So will be asking them to check wiring - someone informed me to check the break wiring.
  9. Bdwarb1

    Help engine still runs after I take key out of ignition

    Not a runaway either - this is an electrical fault. I have seen loads of people with a similar issue.....runaways are rare.
  10. Bdwarb1

    Help engine still runs after I take key out of ignition

    Hi Don’t think the Puma has a solenoid - I had someone suggest a wiring problem....perhaps in the break lights
  11. Bdwarb1

    Help engine still runs after I take key out of ignition

    Hi I have a another Puma problem! When I take the key out of the ignition the engine still runs until I put my foot in the break......has the ignition switch changed last week and it’s done it again! Any ideas please????
  12. Bdwarb1

    Two probs leak around transmition box and also occasional grinding noise (ver occasional)

    Hi Any thoughts appreciated! Had a mid service and now there is a leak of fluid from the transmition box - well it’s over the box under the car. Is this normal after a service or is there a problem? Also the occcassional noises- sounds like a grinding noise when driving - comes and goes and is...
  13. Bdwarb1

    Fault PO234 engine overboost

    Thanks - I thought I might replace anyway just in case. Am I correct that the sensor is on the actuator? I’m new to all this! Could you tell me the part and also point me in the general direction to replace it? Appreciated B
  14. Bdwarb1

    Fault PO234 engine overboost

    Well Sod’s law - they checked everything through and drove it silly for 20 miles....nothing....running well. Complimented on how well she runs. I’m guessing either it will happen again or that the AA man greasing the actuator arm has helped. The garage suggested the arm could have been sticking...
  15. Bdwarb1

    Fault PO234 engine overboost

    Hi I have it booked in to a local garage that has some experience with defenders. So I’ll pass the advice on and it’s much appreciated. Cheers B
  16. Bdwarb1

    Fault PO234 engine overboost

    Thank you
  17. Bdwarb1

    Fault PO234 engine overboost

    Puma 2008 2.4
  18. Bdwarb1

    Fault PO234 engine overboost

    Hellllpp pleassseeee On hols in Alnwick Northumbria- driving up had to Call AA as no power up hill. Had similar problem before but it was a loose wire....checked but ok this time. I don’t want to buy a new turbo! Any ideas what this could be? It come up with checking the actuator- he...