thanks for the info tyres size 255x60x16 to 255x55x18 not far off .abs sensors send 8000 pulses to abs ecu per mile and then to becm .i just thouht the one off the other r/r with 18 wheels would show right readings.my fuel readings have gone from av 25 to 21 miles per gallon thanks Pete

hi i have just changed my wheels from 16 to 18 this puts my speedo readings out. can i change the abs ecu off the r/r with the 18 inch wheels to give the right readings . my r/r has no TC but the other has will this all work cheers Pete

Hi i have a 1996 dse i have just put all electric seats in you need the part wire loom from the r/r when you take seats out hore this helps Pete

Hi paul thankyou for the link to your skydrive. I made the leads up and fitted today the instructions are spot on radio works great Thanks again ace diagram cheers Pete

Hi Clarky 130 I have p38 dse 1996 the radio has stopped working can you please give me the link to the info on your wire diagram i have one pink 10 pin plug and one grey 8pin I have got the plugs and i can solder ok thankyou cheers Pete

Hi can you please send me the information on the radio fitting.My unit has the pink 10 pin and grey 8pin plugs my e mail is tractorjackabe@aol.com thankyou cheers Pete

Hi the intank pump made the starting ok .did nothing to fuel mpg .there was a cold start unit fitted this only tells ecu engine is cold so less mpg 18-20. I removed all of this. but the psi power box does the job it runs fine now Pete

Hi i had a p38 2.5 1996 with all the same problems . I replaced all the injector rubber hose returns. replaced in tank fuel pump this put bad starting right .I also fitted a psi power box it will do 29-32 at 70 motorway 24-27 round country roads I did all this about 3 years ago still...

thanks for that Can this injector be reconed or do i bye new one thanks Pete

Hi I have fuel leaking from the injector with wires on it I have fitted all new fuel pipes but still leaks The motor runs ok and stars fine .would disel leak from where wires fit into injector ? cheers Pete

hi Grant i had the same problem I have the relay fiited and it did all the things yours did I just pulled the live feed off relay and its back to normal .I then had a psi power box fitted this is a must I now get 31.9 mpg on a run and 25.8 round home . i changed all spill off pipes from...

Hi i have a 1996 dse with the same problem i have changed filter ,spill off pipes but as air is only showing with tank on 1\4 im thinking fuel pump Pete

Hi just to say i put the psi power box on my 1996 B M W dse r/rover 2days ago?and wow what a little sports job it is now .Fuel mpg went up and the auto box dont change gear so much .This is a must for this motor regards Pete

Hi to you all .Can sombody tell me if the left hand body shell on p38 dse has the cut out in the floor for gear change in a different position to the right hand drive thanks.I have only joined this site 1 week ago is very good for info thanks Pete

Yes i did sorry im new here its my first time cheers pete

Hi to all out there I have the hot start relay fitted on my motor Can i fit the 15 second timed relay on same pin numbers The relay is off a 1986 classic.I think the hot start relay on my range rover has done my fuel 17.5 mpg I had the normal relay fitted for a week was gettin 23.9mph cheers...

Hi to all out there ,im pete from bridgnorth I have just had A range rover p38 dse. Can some one tell me if the relay for bad hot starting has the same wiring config for the 15 second relay off 1986 range rover as i have the normal one fitted.Can i put the timed one on same as normal one cheers pete