Hi Nick and Hi to you all. I have just put a new wiper switch on the car and it's still not working. Moto is ok tested switch is ok new fuse is ok tested I have swopped the relays over I am only geting volts on one wire to the moto with the ignition off and with the ignition on and with the...

Hi Nick and Hi to you all. I have just put a new wiper switch on the car and it's still not working. Moto is ok tested switch is ok new fuse is ok tested I have swopped the relays over I am only geting volts on one wire to the moto with the ignition off and with the ignition on and with...

Hi Wills Thanks for the help. Do the door cards came off ok or do you end up braking off all the clips.

wot no help !! go on i could do with it is it a moto!!!!! peter

Hi I have taken the switch to Autolec in Port Talbot and thay say that the switch can't be tested !!!!! :( But i will take the switch back off the car and the tecy in work can have a look at it for me . And i will be looking on ebay for one 99p p+p £1 lol :D

Yes it's my just one more think my R.L.H window will not open. there is a clik when i press the switch but thats all. The clik is from the front drivers side of the car but not from the switch pack any help :confused: peter

The high mounted stop light is not working on my 98 R/R the fuse is ok and all the bulbs are new. no message from the message centre any one had this one B4 all the best peter

Hi all. I still have a problem with my front wipers . The back wiper will squirt and wipe the front squirters still work but the wipers don't. The fuse is ok and the moto will work off the car when put onto a batt. I have looked at the column switch and it all looks ok to me :confused: :o...

DO you need a cat if your runing on lpg !!!!!!!!!! all the best peter

Hi all thank you for your help alternator !!! how much :( :( where is it and can i do it D I Y lol :) what's the best batt for it :confused: . is it that red top lol wipers working one day and then not !!!! is it the motor or same think diff The back end is working...

Hi yes i think that i have drained the battery. It's not flat i have got all the dash lights on but it's just click click click I have been on the phone with Seve Hill ' Seve Hill Land Rovers in Bristol' and he pointed to the battery as well . I am now looking for a new battery and...

Hi all Where is the best place to get a front wiper motor from and eny tip on fitting it all the best peter

The front wipers on my p38 are not working so I have disconnect the front wiper motor multi plug and hooked up a volatge tester and measured the voltage to the motor the voltage is fine so the motor has probably failed. i just put the red bit on the plug connector of the motor and the...

yes i did and thank you i was thinking that i was not going to get help with this but i did :) :) :) thank you for taking the time out form me matt I will keep you up to date with this all the verv best peter

Thank you Mat and eightinavee for your replys matt have you got a name and number for your specialist if i can't get it sorted this end i will take it to him next week. :eek: eightinavee did you have to take the dash out for that job:eek: just thinking i have had a gas conversion on the...

Thank you Mat and eightinavee for your replys matt have you got a name and number for your specialist if i can't get it sorted this end i will take it to him next week. :eek: eightinavee did you have to take the dash out for that job:eek: just thinking i have had a gas conversion on the...

Hi Matt no he was at a loss as well but he did say to take the becm out and have a check on it. but i dont want to pull it apart if i can help it thank you for the reply peter

Hi to you all This is the update to my problems so far:confused: I have taken my p38 to a LR specialists today, Lewis Land Rovers Ltd of Neath in South Wales and spent 3hrs and £57.00 to find out that the becm is not communicating with the ABS ecu or the air suspension ecu and it will not...

Hi do you know were i can get a copy of a diagnostics software program. I still need halp and advice on the electrical side see the is it the becm post all the best peter:(

Hi to you all. I have had a good look at the fuse box and all the fuses are at 13v . The fuses on the BECM are 13v all but one F6 and that had a voltage of 11v with engine running looking at the circuit diagram there is a relay R10 could this be were the fult is. If this is the fult how do i fix...