Yep or a good hard right foot down then quickly off the gas so it goes onto over run then wait for the BANG BANG BANG:D:D

the switch might just need a bit of adjusting, try that first.

Thats the fello :D

Mate had the same Issue with his Indicators in his 300TDi and his relay crackled, Turned out to be the fuse was OK but wasnt making a good connection and they use Blades, Try swapping the fuse or cleaning the contacts up and see if that helps

I keep looking at the HiLift Extreme as I like the top Clevis set up, Again I would say Tirfor or HiLift. ORRRR I saw this Ausi thing on Youtube which is effectively a drum that mounts to your wheel hubs and thus when it spins it pulls the line in, If you could make a quick release or low...

There is a couple of ways I know the basic one is Spark plug in the end pipe which is illegal, Running Rich is another way, And A REAL posh way ive seen is a chopped up carb mounted to the zorst pipe so you can spray fuel into the zorst :whoosh:

Used to have Buckshots on an old VW Baja and they were great slightly more aggressive than Hankook but I noticed alot of noise from them but not having ran them on the landy cant say if they are more noisy or not. Make sure you have white writting out thou ;)

HIDs have always been illegal in the UK the only reason manufactures get away with fitting them is due to a EU exception which stops the car makers having to have several different specs for the same car for different country's, As for after market kits They are 100% Illegal unless you get a...

Does sound like your Switch now you have explained it better, Pull your stalk out and have a fettle

Bloody German engineering topping our British Engineering lol Comisiration to the Family. Wounder how he lost it in a MOD landy, Do they have TD5???

Hmmm yeah cant beat a hot rod with them especialy if its not sealed as at night you can get a good catherine wheel effect out of them :D:D Next he will be asking who can do ghost flames and full wheel arch fill ins and Hydro suspension ;)

Not just MOT the law has been for a long while now that a vehicle can not be louder than a similar vehicle with a stock exhaust, A scooby boy got done round here the other month, thus not on MOT but Fuzz and VOSA can have you bent over, Have a look at Demon tweeks they will do silencers with...

Its these times its always handy to a spare relay lol. Take a Ohm reading across the switch and see what you get, Then pull your relay and using jumper wires ( NOT JUMP CABLES ;) ) Test your relay that should help solve it

Done about 4-6k on them and they still have the nice color stripes on them only worn down a MM if that lol, Seem good in the wet never had problems even on a bit of a dually with a know puddle she just sailed through as thou it was dry.

Just pulled the old receipts and I was £109 each incl fitting and balancing, ;)

Have you got a lift?? Just having larger tyres wont alter the suspension. the stock one is about 2 - 3" thick and ive got shed loads of room for my stock one on my 2" lift,. So you have either mucked up or dont have a lift ;)

The trailer tell tale should of always flashed with the hazards as the tell tale works by the load, More load makes it flash thus when you have your hazards on it thinks its got a trailer. As for the MOT they are not testing 7 pin for working order just security and condition yet but they are...

Dynapros all the way mrs has the ATs on her Mitsubishi and I have the MTs on mine, Even on the Ice the MTs performed well.

How landys should be maintained ;) Might be firing the old mig this week so might take my spanner with me.

Looking nice, TBH thats all you need for all of them, A couple of Push fit x Push fit connectors then the tubing, All you have to do is cut the end of the current breathers so its nice and clean and push the new push fit connector on then run a new pipe. Not sure about the TD5 but the TDi have...