waldershelf
Well-Known Member
Before I did the wheel bearings on my 90 I bought a box spanner for the hub nuts, however when it came to torquing them up after fitting new bearings I hit a snag. You can't put a torque wrench on a box spanner, I ended up putting a T bar through the holes and fitting the torque wrench to a socket on the square of the Tbar, not ideal.
So this morning I took a piece of flat bar and an old 1/2" socket and modified the box spanner to accept my torque wrench, works OK and a lot cheaper than a proper 52mm socket
So this morning I took a piece of flat bar and an old 1/2" socket and modified the box spanner to accept my torque wrench, works OK and a lot cheaper than a proper 52mm socket