My engine (19J TD) was recently overhauled ,but the only part that hasn't be changed are the glow plugs, i am getting a set next week and i can't wait to put them on when i get them. I hope that would clear some /all the white smoke away. I'll let you guys know how it go. It's true white...

I forgot to say, that there is more horse power and torque when the new injectors were put in.

Hey guys, What can i do about the white smoke that is coming from my tailpipe? this usually happens when i am starting the engine for the first time for the day, or when the engine is COLD, also lots of white smoke when i am justing the gearbox as the break. Many thanks

I finally got my injectors replaced, with a little help from a mechanic. It was a challenge, the most challenging part is to get the engine started. going through this process i have learn a few things along the line, here are some tips i will like to share with you all: 1)make sure you have...

With this wealth of information, i am going to give it a go and see how it turns out. Once again thank you all.

what a coincident, i have a land rover the same model as yours and i re-sprayed four months ago. It was done by an experience body man. what i saw him did for the body which is aluminum grind it until it's shiny an apply the primer, base coat and a H2 clear coat (better and shiny clearcoat). Now...

Thanks guys for responding. Does each injector hole have a designated injector? After hours of "swearing and Encouragment" (Discomania) and replacing new injectors, what else do i need to do? do i need to purge the fuel system at the lift pump so i can start again?:)

Anyone out there are familiar with replacing the 19j Injectors? It look straight forward up to the point with the injector close to the firewall of the engine, it seems like it need to be connected by welding? Any ideas and tips are greatly appreciated. Many thanks in advance.

Hello Pos, So what am i doing? disconnet the breather hose and connet it to the much larger hose which is the turbo? From what i see the engine have a 12J block and a 19J head that explains the turbo and the two pipes coming from the breather cap.(that how i got it from the previous owner)...

Hughesey, So you think is the engine fault? It's a 12J engine with a turbo.

Hi, Is there any way where i can minimize engine oil coming out from the air filter due to back pressure from the turbo? It's annoying!!! Thanks for responding.