according to rave on a 1995 model the white wire coming from tailgate switch goes to the connector on the right tailgate lights, so i would check if the tailgate lights work, if they do then check for continuity, otherwise the wires go into r/h side rear luggage compartment into a 10 way connector

ok. thanks. i will try again tommorrow

tried britcar, maybe because its sunday, no reply on the chat line. clicked contact us, sent an e-mail, its just been returned, tried phone number, no connection

the bit that wories me is the statement underneath the picture of the exact one i need to fit my car. Product photographs are for illustration purposes only.

note quite, but mine is identicle to the back box on the other picture ho2 looks like ho1 is for a deisel and ho2 is for a v8 petrol what is the part number for that back box on ho2 picture? please

same here, site gone. i bought mine 2/11/10

1995 , 4.0 se

i bought it on the internet years ago, as a standard item neither of those pictures show the outlet pipe right, its straight out ,oblong,about 4" across and 2 1/2" high exhaust 013.jpg

hi all, my rear box is rotted out, i bought a new one from britpart,esr 3538 it will not fit my car. the new one is a tilted oblong one, which hits the lpg filler pipe. the old one is like 2 boxes joined together, one small one large, same design as the rear box on a double box setup. any...

i will get one ordered, thanks. i will also need 4 jubilee clips as mine has none on either end of either breather pipes

thats not my rocker covers, that looks like a thors engine not gems 1, my filler neck is on the front right cover 2, my breather pipe(11) is not that shape, its more like item 14 with the last couple of bends cut off.

just spoke to range rover, parts dept, it is only fitted to some deisel engines not on my 4.0 se

what about this, any good for you? www.dropbox.com/sh/xrk617wn5sm572m/AAAdkEVr0fPonx8GpTM5AXi4a?dl=0 i use a cd that i bought from fleabay many years ago, dont know if you can still get it.

there is not one of them plastic spiral things anywhere on my car if it should have one or two i will have to get them

where is the separator? mine just has one pipe from rocker cover to plenum side on left and one pipe from rocker cover to air intake on right side ,all pipes and rocker covers now blow through easily

took the pipe fitting off of plenum chamber (22mm spanner) tried air at 100 psi no go, carb cleaner just stayed in there,held a small 3mm drill in hand and twisted it gently, when removed , just black stuff on the end so kept going by hand and eventually it went all the way through. cleaned it...

in haynes workshop manual , it states" the pump is wired in such a way that it is only energised when the ignition is switched on and the engine is running, or when the starter motor is cranking. An inertia switch , in series with the pump, stops the pump operating in case of an accident"

would spraying carb cleaner into the pipe fitting, clean it out ,without doing any damage, or should i use a small drill?

as name suggests. only have one arm, can't use a mobile very well, so never learnt how to take pics and put them onto computer, so i have editted the front page to make it easier to know what i am on about.lol

when standing in front of the car, at the rear left there is a rubber pipe , coming from rocker cover up 1.5" then across 6" to the side of the plenum chamber. question 1; what is the part number for this pipe? question 2, this pipe fits onto a fitting into the plenum chamber, should you be able...